Preparation Before Operation; Auto Restart Function; Remote Controller - Mitsubishi Electric MSZ-GA22VA Operating Instructions Manual

NAME OF EACH PART

Remote controller

Signal transmitting section
Operation display section
ON/OFF (operate/
stop) button
Open the front lid.
(This diagram shows an overall view.)
Fan speed control button
Operation select button
ECONO COOL button
RESET button
4

PREPARATION BEFORE OPERATION

Auto restart function is ...
When the indoor unit is controlled with the remote controller, the operation mode, the set temperature and the fan speed are
stored in the memory. If a power failure occurs or the main power is turned off during operation, "Auto restart function" sets
automatically to start operating in the same mode as the one set with the remote controller just before the shutoff of the main
power. (Refer to page 6 for details.)
Temperature buttons
Remove dirt from the power supply plug and insert the plug securely.
If dirt adheres to the plug or insertion is incomplete, it may cause a fi re or an electric shock.
NOTE
Use the remote controller provided
with the unit only.
Do not use other remote controller
Off-timer button
On-timer button
TIME set buttons
Forward button
Backward button
CLOCK set button
Vane control button

Auto restart function

These models are equipped with an auto restart function. If you do not want to use this function,
please consult the service representative because the setting of the unit needs to be changed.
Indoor and/or Outdoor unit
Insert the power supply plug into the power outlet and/or turn the breaker on.
WARNING: