Indoor And Outdoor/Remote Temperature; Wireless Remote Temperature Transmission - Sharper Image MI603 Instructions Manual

Indoor and Outdoor/Remote Temperature Readout
1. The indoor and outdoor temperatures can be displayed in either °F or °C. To
select °F or °C, press the °C/°F button on the main unit or remote unit until the
desired display appears. The main unit converts the temperature if the remote
transmitter unit is set to a different temperature display. If the temperature
exceeds or falls below the unit's range, the LCD shows either "HI" or "LO" in
place of the temperature.
2. To display the recorded minimum and maximum indoor and outdoor temper-
atures in succession, press the TEMP/MAX/MIN button on the main unit
repeatedly. The temperature display returns to the current temperature after
5 seconds or after hitting the TEMP/MAX/MIN button three times. To clear the
maximum and minimum temperature data, press the CLEAR button while the
maximum and minimum temperature is shown on the LCD.

Wireless Remote Temperature Transmission

The Transmission frequency is 433MHz. The outdoor transmission range is 100
feet from the main unit. Obstacles, walls, etc. will reduce the transmission range.
Once the main unit is plugged in or the batteries have been installed, it will start
to receive signals for 10 minutes. Once batteries are placed in the remote unit, it
will start to transmit temperature data to the main unit every 3 minutes. Upon
successful reception, the remote/outdoor temperature will be shown in the
remote temperature field on the LCD. The main unit automatically updates the
remote reading in 3-minute intervals.
Receiver Signal Indicator Icons
The following icons indicate the signal transmission status on the LCD:
13