Installation Problems - Watchguard DV-1 User Manual

INSTALLATION PROBLEMS

On the boot back door, you can select between 5 languages, or
locales: English, Turkish, English-Canada, French-Canada, and
Spanish. English-Canada is the same as English except that the
date format is DD-MM-YYYY instead of MM-DD-YYYY.
Press the  and  keys to select a language, and then press OK.
Improper installation WILL cause system instability. If errors are
common, confirm that the installer has connected the power
and ground wires through the firewall directly to the vehicle
battery. Grounding ONLY to the car frame or a terminal is not
acceptable for reliable DV-1 operation.
The Intelligent Uninterruptible Power Supply Battery (iUPS) may
require additional charge or may need to be replaced.
Check the fuse in the ignition (switched) power wire. Check the
settings in Set System Behavior
Allow up to 5 minutes to complete the file recovery process. If it has
stalled at the startup progress bar, press the
another restart. If it stalls again, a Quick Format of the DV-1
internal hard drive may be required. See
on page 109 for formatting instructions.
If the system cannot be booted, follow the instructions in
Back Door Maintenance
116
on page 78.
OFF
Hard Drive Quick Format
NOTICE
on page 114.
key and attempt
DV-1
TROUBLESHOOTING