Connect And Charge; Battery Level Indication; Install; Powering On And Off - Philips GoGear HDD1835 User Manual

5. System requirements:
- Windows® XP (SP1 or above)
- Pentium Class 300 MHz processor or higher
- 128 MB RAM
- 500 MB hard disk space
- Internet connection
- Microsoft Internet Explorer 6.0 or higher
- USB port
Lost your CD? Don't worry, you can download the CD contents from
www.usasupport.philips.com
Transfer
You can transfer music and pictures to your player using Windows Media Player. See "Organise and
synchronise pictures and music with Windows Media Player" on page 8 for more details.
Enjoy

Powering on and off

To power on, press and hold
PHILIPS screen appears.
To power off, press and hold
NOTE!
Your player automatically powers off if there is no operation nor music played for 10 minutes. The last
playback status and screen will be resumed the next time it is powered on unless the player has been
powered off for a long period of time or the battery level was low when the player was powered off.
Reset
In the unlikely event that your player hangs, do not panic. Simply press and hold
buttons at the same time until the player shuts down.
TIP
The existing contents on your player will not be erased when you reset your player.
(for U.S. residents)
y
button for 3 seconds until the player resumes to its last state or the
POWER
y
button for 3 seconds until the player shuts down.
POWER
www.philips.com/support or
y
and
POWER VOLUME
4
+