Basic operation Volume control Press the "+" or "-" button to turn volume up or down, you hear beep once reach the maximum or minimum volume. Status indicator Instruction LED status Voice prompts Power on Blink blue three times Power on Power off Blink red three times Power off...
Page 5
Pairing Pair one phone 1. Press and hold the Multifunction Button until LED flashes blue and red alternately, you hear "Power on" and "Pairing", now headphone is in pairing mode. 2. Activate Bluetooth on your phone and set it to search for new devices.
Page 6
3. Select "Muse1". If your phone asks, enter 0000 (four zeros) for the passcode or accept the connection. The LED indicator stops flashing red and blue once successfully paired, you hear "Connection successful". Some phone list an option to "Play through headphone", select to use the headphones.
Pair another phone Multipoint technology enables you to pair another phone and take a call from either. To pair with another mobile phone, follow the steps for "Pair one phone". After pairing successfully, restart the headphone to connect to 2 paired mobile phone automatically. Bluetooth Bluetooth Muses1...
Page 8
Call Answer a call Press volume button (+ or -) to answer an incoming call. End a call Press and hold the volume button (+ or -) for about 2 seconds to end a call. Redial last call Double-press the volume button "-", the mobile phone will redial the last call number.
Page 9
Music (Need music player supports.) Trackback Press and hold "▲" for about 2 seconds when playing music, and the previous song will be played. Trackforward Press and hold "▼" for about 2 seconds when playing music, and the next song will be played. Pause/Play Press "-"...
More features Battery Indicator When the headphone is connected to a device with iOS system, a battery indicator will appear at the upper right of the system, indicating battery status of the headphone.
Auto power-off When the distance between the headphone and the mobile phone is beyond effective range, a voice prompt "Connection lost" and headphone disconnects with the mobile phone, the headphone will power off automatically once no active for 10 minutes. Effective 30min range...
Automatic connection after powering on When the headphone and phone have been paired once, they will automatically connect when the headphone is on and Bluetooth is activated on the phone. Power off To power off the headphone, press and hold the multifunction button for about 4 seconds, the LED blink red three times, you hear "Power off", then power off the headphone.
Page 13
Charging Your headphone has enough power to complete the pairing and a few calls. When battery is low, you will hear the voice prompt "Battery low". It takes 1.5 hours to fully charge the headphone. The red LED turns on during charging. The red LED will turn off and the blue LED will turn on after being fully charged.
Hard reset In turning on mode, press and hold the multifunction button with the charger plugged to reset the headphone. Then the red LED will light (you can release the multifunction button 2 seconds after mounting the charger).