Advertisement
AMPLIFIER BLOCK DIAGRAMM
CONTROLS AND CONNECTORS
-
1 MAINS IN - power cable socket.
2 TO SATELLITE A- Channel A Output.
3 INPUT (CHANNEL A / MONO) . Channel A Input / MONO
Input.
4 THROUGH . Channel A Line Output. Used to link the Channel A
input signal to an input of another amplifier via an XLR connector.
The Channel A THROUGH connector is parallel to Channel A
(CHANNEL A / MONO) INPUT connector.
5 THROUGH . Channel B Line Output. Used to link the Channel B
input signal to an input of another amplifier via an XLR connector.
The Channel B THROUGH connector is parallel to Channel B
(CHANNEL B/MONITOR) INPUT connector.
6 INPUT (CHANNEL B / MONITOR) . Channel B Input / Monitor
Input.
7 TO SATELLITE B OR MONITOR . Channel B Output.
8 POWER . power switch.
9 MODE . Mode Switch.
Used to select the required operation mode:
- MONO . two satellite channels are driven by the same input signal
source connected to Channel A input (the signal applied to the
subwoofer is picked up from the Channel A input signal);
- STEREO . each satellite channel is driven by its own input signal
source (the signal applied to the subwoofer is picked up out of the
summed signal applied to the inputs of Channel A and Channel B);
MONITOR . Channel A amplifies the signal for the satellite, and
Channel A for the monitor (the signal applied to the subwoofer is
picked up out of the Channel A signal).
10 LIMITER . Channel B Limiter LED. Indicates Channel B overload
and activation of the built-in Clip-limiter.
11 LEVEL (CHANNEL B / MONITOR) . level control knob for
Channel A/ Monitor Channel.
12 LIMITER . Subwoofer channel Limiter LED. Indicates the
subwoofer channel overload and activation of the built-in Clip-limiter.
13 LEVEL (SUBWOOFER) . level control knob for Subwoofer
Channel.
14 LIMITER . Channel A Limiter LED. Indicates Channel A overload
and activation of the built-in Clip-limiter.
15 LEVEL (CHANNEL A) . level control knob for Channel A.
16 POWER . Power LED.
Advertisement
