Download Print this page

aija audio SUB LP210A User Manual

Acoustic system

Advertisement

Quick Links

SIA "AIJA AUDIO" Pils Rajons 44, Jēkabpils, LV-5202, Reģ.Nr.45403037487, mob.t. +371 29209384, info@aijaaudio.lv,
GENERARAL INFORMATION
Combined, active low-pass acoustic system includes subwoofer and three- channel built- in amplifier, which provides subwoofer
and two satellites to play medium and high frequencies. The system is recommended to use with the passive acoustic systems LA84,
LA163 or MT LP110/11, which can be also combined. One of the satellites can be used as a monitor in full frequency band.
Corps form- rectangular. Made from – 18 mm birch plywood, corners connected with glue and wooden screws, painted with
structured color. On the sides have built in handles, which helps move the acoustic system. The frontal panel closed with
decorative metal grid- painted with powder paint and glued with acoustic foam rubber to protect the acoustic system from direct
water impact and dusts.
In frontal panel have two built- in low frequency loudspeakers 10 inches. In center of the acoustic system have placed two tunnels-
phase inventors
Into the upper cover have built- in flange with M20 thread, where can be installed a satellite system.
The amplifier protected against overload with built- in optoelectronic Clip-limiter.
The power amplifier is designed according to class D technology to deliver high efficiency and last heat. Cooling system-
automatic. Power supply source- impulsive.
SPECIFICATION
TITLE
Frequency range
RMS power
Max power
Components
Sensitivity
Max peak SPL
Total harmonic distortion
Signal input/output connectors
Channel A,B output connectors
Input sensitivity
Input resistance
Crossover frequency
Filter type
Corps material
Material
Dimensions (WxHxD)
Weight
POWER REQUIREMENTS
The unit is supplied with a three- conductor grounded AC power cord, and should be plugged into a standard 3 wire
grounded electrical outlet which supplies 230 VAC 50/60 Hz
ACOUSTIC SYSTEM SUB LP210A
USER MANUALS
SUB LP210A
Subwoofer: 60-130Hz
Channel A,B: 130-20 000Hz
Channel B in monitor mode: 45-20 000Hz
Subwoofer: 700W 4Ω
Channel A,B: 2 x 350W 8Ω
Subwoofer: 840W 4Ω
Channel A,B: 2 x 420W 8Ω
2 x Faital 10FH300
104dB 1W/m
132dB
0.05% (45Hz-20kHz)
2 x female XLR
2 x male XLR
2 x Neutrik™ NL4MP
0,775V (RMS)
10kΩ (symmetric)
130Hz
24dB/O
18mm Baltic birch plywood
Black structural color
320x624x430mm
24kg
www.aijaaudio.lv

Advertisement

loading

Summary of Contents for aija audio SUB LP210A

  • Page 1 SIA “AIJA AUDIO” Pils Rajons 44, Jēkabpils, LV-5202, Reģ.Nr.45403037487, mob.t. +371 29209384, info@aijaaudio.lv, www.aijaaudio.lv ACOUSTIC SYSTEM SUB LP210A USER MANUALS GENERARAL INFORMATION Combined, active low-pass acoustic system includes subwoofer and three- channel built- in amplifier, which provides subwoofer and two satellites to play medium and high frequencies. The system is recommended to use with the passive acoustic systems LA84, LA163 or MT LP110/11, which can be also combined.
  • Page 2 AMPLIFIER BLOCK DIAGRAMM CONTROLS AND CONNECTORS 1 MAINS IN - power cable socket. 2 TO SATELLITE A- Channel A Output. 3 INPUT (CHANNEL A / MONO) . Channel A Input / MONO Input. 4 THROUGH . Channel A Line Output. Used to link the Channel A input signal to an input of another amplifier via an XLR connector.
  • Page 3 CONNECTORS For the audio signal Use the XLR (male) connectors for the input, and XLR (female) connectors for the line output. Cold “-” Cold “-” Shield (ground) Hot “+” Hot “ +” Shield (ground) Use NL2FC or NL4FC SPEAKON connectors for the Channel A,B output power signal. NL2FC SPEAKON NL4FC SPEAKON Hot “+...