Advertisement
Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor
base is unplugged from the power
source before inserting or removing any
attachment and before cleaning.
CAUTION: DO NOT immerse the motor
base into water or any other liquid.
1
The pitcher, lid and blade assembly are
all dishwasher safe. It is recommended
that the lid and blade assembly be placed
on the top rack.
2 You may also wash the blender by filling
½ of the pitcher with warm water and a
drop of dish washing detergent, placing
the lid on the pitcher and pressing the
"Pulse" on the handle a few times. Once
clean, remove the pitcher from the motor
base. Rinse the pitcher, blade assembly
and lid under running water. Allow all the
parts to dry before storing.
Use extreme caution when handling
the blade assembly as blades are very
sharp.
Please call customer service if any
servicing needs to be performed on the
appliance at 1-877-646-5288.
10
BL300_30_IB_ENG_111103_1.indd 10
TOLL FREE:
1-877-646-5288
HOW TO STORE
1
Store the Ninja
Pulse Blender upright
®
with the pitcher, blade assembly and
cover on the motor base. Do not place
anything on top.
RESETTING THE MOTOR THERMOSTAT
The Ninja
®
Pulse Blender features a unique
safety system which prevents damage to the
unit's motor and drive system should you
inadvertently overload your appliance. If the
appliance is being overloaded, the motor
will stop. To reset the appliance, follow the
resetting procedure below:
1
Unplug the appliance from the electrical
outlet.
2 Remove and empty the container and
ensure that no food is jamming the
cutting blades.
3 Allow the appliance to cool for
approximately 30 minutes.
4 Re-install the container onto the base
and re-plug the appliance into the
electrical outlet.
5 Proceed to use the appliance as
before making sure not to exceed the
recommended maximum capacities.
11-11-03 9:25 AM
Hide quick links:
Advertisement
