Important Safety Information; Danger-Electric Shock And Fire - OPENPEAK OpenFrame 2.0 Quick Start Manual

Important Safety Information

Please read the following important
safety notices and instructions before
installing or using the product.
• A DaNGEr warning refers to
situations that could cause bodily
injury.
• A CaUTION warning refers to
situations that could result in
equipment malfunction or damage.
1. Follow all warnings and instructions
marked on the product.
2. Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a water-moistened cloth for
cleaning.
3. Do not use this product near water.
4. Do not place this product on an
unstable cart, stand or table. If the
product falls, it could be seriously
damaged.
5. This product should be operated
using the type of power indicated on
the marking label. If you are not sure
of the type of power available, consult
your dealer or local power company.
6. Do not allow anything to rest on
the power cord. Do not place device
where people will walk on the cord.
10
7. Never push objects of any kind into
this product through cabinet slots as
they may touch dangerous voltage
points or short-out parts that could
result in a fire or electric shock.
8. Never spill liquid of any kind into or
onto the product.
9. Do not attempt to service this
product yourself, as opening or
removing covers may expose you to
dangerous voltage points or other
risks.
10. Refer all questions regarding
servicing of this product to qualified
service personnel.
DaNGEr—ElECTrIC SHOCK
aND FIrE
Electric current from power,
telephone, and communication
cables is hazardous, and could result
in electric shock and/or fire.
To avoid electric shock, use caution
when connecting cables.
For example, do not connect safety
extra-low voltage (SELV) circuits to
telephone-network voltage (TNV)
circuits. LAN ports contain SELV
circuits, and WAN ports contain TNV
circuits. Some LAN and WAN ports
both use RJ-45 connectors.
To avoid electric shock, do not
operate the product or connect or
disconnect cables during electrical
storms.
To avoid electric shock, do not use
this product in or near water.
To reduce the risk of fire or overheat-
ing, keep this product in well-ventilat-
ed areas, away from radiators or other
heat sources. Do not block cooling
vents. The plug-socket combination
must be accessible at all times
because it serves as the main
power-disconnecting device.
Use only the manufacturer-provided
AC adaptor approved for use with this
product. Use of another AC adaptor
may cause a fire or explosion.
This product relies on short-circuit
(overcurrent) protection installed in
your home or office. Ensure that a
fuse or circuit breaker no larger than
120 VAC, 15A U.S. is used on the
phase conductors (all current-carry-
ing conductors). Unplug this product
from the wall outlet and refer
servicing to qualified service
personnel under the following
conditions:
a. When the power cord or plug is
damaged or frayed.
b. If liquid has been spilled into the
product.
c. If the product has been exposed to
rain or water.
d. If the product does not operate
normally when the operating
instructions are followed. Adjust only
those controls that are covered by the
operating instructions, since improper
adjustment of other controls may
result in damage and will often
require extensive work by a qualified
technician to restore the product to
normal condition.
e. If the product has been dropped or
the case has been damaged.
f. If the product exhibits a distinct
change in performance, indicating a
need for service.
CaUTION—DISPOSal
This product contains harmful
substances. Ultimate disposal of this
product should be handled according
to all applicable laws and regulations.
Do not put the product or its
components (including the LCD or
the rechargeable battery pack) in
trash that is disposed of in landfills.
11