Troubleshooting; Service Setup; Voicemail Setup - OPENPEAK OpenFrame 2.0 Quick Start Manual

Service & Voicemail Setup

SErvICE SETUP:

For wireless connections, be sure to
have your home Network Name
and Password readily available.
Using the On-screen
Setup Wizard
Now that your OpenFrame 2.0 is
powered-up, on-screen instructions
will walk you through the simple
setup.
Touch the screen with your finger
to move through the process and
to complete any required fields.
To enter information in a blank
field, touch the empty field with
your finger to bring up the
keyboard screen.
6

vOICEmaIl SETUP:

STEP 1
Using the handset, dial *86.
STEP 2
Enter the last 4 digits of your
OpenFrame 2.0 phone number
followed by the # key. These 4 digits
are your default PIN.
STEP 3
To create a new personalized PIN
enter a 4 to 10 digit number
followed by the # key.
STEP 4
Follow the Voice Mail prompts to
record:
– Your name
– Personalized greeting
– Busy greeting
Your Voice Mail account is now
ready to use.
© 2009 OpenPeak. All Rights Reserved.

Troubleshooting

1. Check Your Connection
Make sure your cable and power
cords are securely connected.
2. Check Your Internet
Connection
From your personal computer,
check the status of your home's
Internet access. Launch a browser,
such as Internet Explorer or Firefox,
and confirm that you can reach
your usual home page.
3. Check Home Network
Connection
If you are using a wireless
connection, check the OpenFrame
2.0 Wi-Fi signal strength. If your
device isn't receiving a strong
signal, try moving it closer to your
wireless router. Make sure your
router is working properly. If you
are using a wired connection, make
sure the Ethernet cable is securely
connected at both ends. Contact
your Internet provider if you
believe you aren't getting a signal.
4. restart the Device
Unplug the power cord from the
outlet, wait 15 seconds, then plug
the power cord back in. Your unit
will restart.
7