Related Manuals for Allnet ALL-CAM2305-LW
Summary of Contents for Allnet ALL-CAM2305-LW
-
Page 1: User Manual
ALL-CAM2305-LW ALL-CAM2388-LVE(W) ALL-CAM2395-LVEF ALL-CAM2396-LEF ALL-CAM2397-LE(W) User Manual... - Page 2 Default-IP via DHCP Username & Password: admin © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 3: Regulatory Information
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 4: Safety Instruction
If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for problems caused by unauthorized © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 5 © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 6 IR LEDS. Fasten the dome cover to camera body so that the foam ring and the dome cover are attached seamlessly. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 7: Table Of Contents
Configuring Port Settings ................44 6.3.3 Configuring PPPoE Settings ................45 6.3.4 Configuring DDNS Settings ................45 6.3.5 Configuring SNMP Settings ................48 6.3.6 Configuring 802.1X Settings ................50 © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 8: Chapter 7 Playback
Others ................102 Managing User Accounts ............102 Authentication ................104 Anonymous Visit ................. 105 IP Address Filter ................106 Security Service ................107 Viewing Device Information ............108 © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 9 9.7.3 Exporting / Importing Configuration File ............. 110 9.7.4 Upgrading the System ..................111 RS-232 Settings ................111 RS-485 Settings ................112 9.10 Service Settings ................113 © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 10: Chapter 1 System Requirement
Chapter 1 System Requirement Operating System: Microsoft Windows XP SP1 and above version / Vista / Win7 / Server 2003 / Server 2008 32bits CPU: Intel Pentium IV 3.0 GHz to Core i7-4000 series or higher, depending on different video resolutions RAM: 1G or higher Display: 1024×768 resolution or higher Web Browser: Internet Explorer 7.0 and above version, Safari 5.02 and... -
Page 11: Chapter 2 Network Connection
Chapter 2 Network Connection Before you start: If you want to set the network camera via a LAN (Local Area Network), please refer to Section 2.1 Setting the Network Camera over the LAN. If you want to set the network camera via a WAN (Wide Area Network), please refer to Section 2.2 Setting the Network Camera over the WAN. -
Page 12: Detecting And Changing The Ip Address
Figure 2-3. Use the ALL-VMS client software to list the online devices. Please refer to the user manual of ALL-VMS client software for detailed information. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 13 For accessing the network camera from different subnets, please set the gateway for the network camera after you logged in. For detailed information, please refer to Section 6.3.1 Configuring TCP/IP Settings. Figure 2-3 SADP Interface © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 14: Setting The Network Camera Over The Wan
5. Visit the network camera through a web browser or the client software over the internet. Figure 2-4 Accessing the Camera through Router with Static IP © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 15: Dynamic Ip Connection
5. Apply a domain name from a domain name provider. 6. Configure the DDNS settings in the setting interface of the router. 7. Visit the camera via the applied domain name. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 16 Figure 2-7 Normal Domain Name Resolution Steps: 1. Apply a domain name from a domain name provider. 2. Configure the DDNS settings in the DDNS Settings interface of the © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 17 2. Access the network camera through the LAN with a web browser or the client software. 3. Enable DDNS and select IP Server as the protocol type. Refer to Section 6.3.4 Configuring DDNS Settings for detailed configuration. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 18: Access To The Network Camera
Chapter 3 Access to the Network Camera 3.1 Accessing by Web Browsers Steps: 1. Open the web browser. 2. Input the IP address of the network camera in the address bar and press the Enter key to enter the login interface. 3. - Page 19 4. Install the plug-in before viewing the live video and operating the camera. Please follow the installation prompts to install the plug-in. Figure 3-2 Download and Install Plug-in Figure 3-3 Install Plug-in (1) © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 20: Accessing By Client Software
Follow the installation prompts to install the software. The control panel and live view interface of ALL-VMS client software are shown as bellow. Figure 3-5 ALL-VMS Control Panel © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 21 Figure 3-6 ALL-VMS Configuration Panel Note: For detailed information about the software, please refer to the user manual of the ALL-VMS. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 22: Wi-Fi Settings
Chapter 4 Wi-Fi Settings Purpose: By connecting to the wireless network, you don’t need to use cable of any kind for network connection, which is very convenient for the actual surveillance application. Note: This chapter is only applicable for the cameras with the built-in Wi-Fi module. - Page 23 2. Customize a SSID for the camera. 3. Choose the Security Mode of the wireless connection. Figure 4-4 Security Mode- Ad-hoc Mode 4. Enable the wireless connection function for your PC. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 24 Figure 4-5 Ad-hoc Connection Point 6. Choose the SSID and connect. Security Mode Description: Figure 4-6 Security Mode choose Security Mode not-encrypted, WEP, WPA-personal, WPA-enterprise, WPA2-personal, and WPA2-enterprise. WEP mode: © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 25 Figure 4-8 Security Mode- WPA-personal WPA- enterprise and WPA2-enterprise Mode: Choose the type of client/server authentication being used by the access point; EAP-TLS or EAP-PEAP. EAP-TLS © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 26: Easy Wi-Fi Connection With Wps Function
CA Certificates - Upload a CA certificate to present to the access point for authentication 4.2 Easy Wi-Fi Connection with WPS function © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 27 (and a registrar of the network) and the new wireless client device. 1. Check the checkbox of to enable WPS. 2. Choose the connection mode as PBC. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 28 Access Point of the network. Steps: 1. Choose a wireless connection on the list and the SSID is shown. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 29: Ip Property Settings For Wireless Network Connection
4.3 IP Property Settings for Wireless Network Connection The wireless network interface controller is set to DHCP. When you connect the wireless network you can change the IP-address. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 30 The setting procedure is the same with that of LAN. If you want to be assigned the IP address you can check the checkbox to enable the DHCP. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 31: Chapter 5 Live View
Chapter 5 Live View 5.1 Live View Page Purpose: The live view page allows you to view the real-time video, capture images, realize PTZ control, set/call presets and configure video parameters. Log in the network camera to enter the live view page, or you can click Live View on the menu bar of the main page to enter the live view page. -
Page 32: Starting Live View
In the live view window as shown in Figure 5-2, click on the toolbar to start the live view of the camera. Figure 5-2 Live View Toolbar Table 5-1 Descriptions of the Toolbar © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 33: Recording And Capturing Pictures Manually
The captured image will be saved as JPEG file or BMP file in your computer. 5.4 Operating PTZ Control Purpose: In the live view interface, you can use the PTZ control buttons to realize © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 34: Ptz Control Panel
For the cameras which support lens movements only, the direction buttons are invalid. Table 5-2 Descriptions of PTZ Control Panel Icon Description Zoom in/out Focus near/far Iris +/- Light on/off Wiper on/off One-touch focus © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 35: Setting / Calling A Preset
In the PTZ control panel, select a defined preset from the list and click to call the preset. Or you can place the mouse on the presets interface, and call the preset by © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 36: Setting / Calling A Patrol
4. Click OK to save the first preset. 5. Follow the steps above to add the other presets. Figure 5-6 Add Patrol Path 6. Click to save a patrol. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 37 7. Click to start the patrol, and click to stop it. 8. (Optional) Click to delete a patrol. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 38: Network Camera Configuration
Chapter 6 Network Camera Configuration 6.1 Configuring Local Parameters Note: The local configuration refers to the parameters of the live view, record files and captured pictures. The record files and captured pictures are the ones you record and captured using the web browser and thus the saving paths of them are on the PC running the browser. - Page 39 Save downloaded files to: Set the saving path for the downloaded video files in playback mode. Picture and Clip Settings: Set the saving paths of the captured © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 40: Configuring Time Settings
DST settings. Steps: 1. Enter the Time Settings interface: Configuration > Basic Configuration > System > Time Settings Or Configuration > Advanced Configuration > System > Time Settings © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 41 National Time Center (IP Address: 210.72.145.44). If the camera is set in a customized network, NTP software can be used to establish a NTP server for time synchronization. Synchronizing Time Synchronization Manually © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 42: Configuring Network Settings
IP version should be configured. Steps: 1. Enter TCP/IP Settings interface: Configuration > Basic Configuration > Network > TCP/IP © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 43 Multicast function of your router. 3. Click Save to save the above settings Note: A reboot is required for the settings to take effect. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 44: Configuring Port Settings
No. ranges from 2000 to 65535. 3. Click Save to save the settings. Note: A reboot is required for the settings to take effect. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 45: Configuring Pppoe Settings
Registration on the DDNS server is required before configuring the DDNS settings of the camera. Steps: 1. Enter the DDNS Settings interface: Configuration > Advanced Configuration > Network > DDNS © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 46 (3) Enter the Port of DynDNS server. (4) Enter the User Name and Password registered on the DynDNS website. (5) Click Save to save the settings. Figure 6-10 DynDNS Settings IP Server: © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 47 (2) Enter the Server Address as www.noip.com (3) Enter the Domain name you registered. (4) Enter the Port number, if needed. (5) Enter the User Name and Password. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 48: Configuring Snmp Settings
Before setting the SNMP, please download the SNMP software and manage to receive the camera information via SNMP port. By setting the Trap Address, the camera can send the alarm event and exception © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 49 HTTPS protocol must be enabled. Steps: 1. Enter the SNMP Settings interface: Configuration > Advanced Configuration > Network > SNMP Figure 6-14 SNMP Settings 2. Check the corresponding version checkbox ( © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 50: Configuring 802.1X Settings
1. Enter the 802.1X Settings interface: Configuration > Advanced Configuration > Network > 802.1X Figure 6-15 802.1X Settings 2. Check the Enable IEEE 802.1X checkbox to enable the feature. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 51: Configuring Qos Settings
DSCP value is used in the IP header to indicate the priority of the data. 3. Click Save to save the settings. Note: A reboot is required for the settings to take effect. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 52: Configuring Upnp™ Settings
Before you start: Please configure the DNS Server settings under Basic Configuration > Network > TCP/IP or Advanced Configuration > Network > TCP/IP before using the Email function. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 53 Sender: The name of the email sender. Sender’s Address: The email address of the sender. SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com). © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 54: Configuring Nat (Network Address Translation) Settings
To port mapping with the customized port numbers: Choose Port Mapping Mode as Manual. And for manual port mapping, you can customize the value of the port © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 55: Configuring Ftp Settings
Configuration >Advanced Configuration > Network > FTP Figure 6-20 FTP Settings 2. Configure the FTP settings; and the user name and password are required for login the FTP server. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 56: Https Settings
Man-in-the-middle attacks. Perform the following steps to set the port number of https. Steps: 1. Enter the HTTPS settings interface. Configuration > Advanced Configuration > Network > HTTPS 2. Create the self-signed certificate or authorized certificate. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 57 1) Click Create button to enter the creation interface. Figure 6-22 Create Self-signed Certificate 2) Enter the country, host name/IP, validity and other information. 3) Click OK to save the settings. Note: © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 58: Configuring Video And Audio Settings
Steps: 1. Enter the Video Settings interface: Configuration >Basic Configuration > Video / Audio > Video Or Configuration > Advanced Configuration > Video / Audio > Video © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 59 Bitrate Type: Select the bitrate type to constant or variable. Video Quality: When bitrate type is selected as Variable, 6 levels of video quality are selectable. Frame Rate: © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 60 The lower value of the smoothing, the higher quality of the stream, though it may appear not fluent. 4. Click Save to save the settings. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 61: Configuring Audio Settings
ROI and background information in compression, that is to say, the technology assigns more encoding resource to the region of interest to increase the quality of the ROI whereas the background © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 62 2. Draw the region of interest on the image. There are four regions can be drawn. 3. Choose the stream type to set the ROI encoding. 4. Choose the ROI type. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 63: Display Info. On Stream
You can set the image quality of the camera, including brightness, contrast, saturation, hue, sharpness, etc. Note: The display parameters vary according to the different camera model. Please refer to the actual interface for details. Steps: © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 64: Image Adjustment
Contrast describes the contrast of the image, which ranges from 1~100, and the default value is 50. Saturation describes the colorfulness of the image color, which ranges from 1~100, and the default value is 50. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 65: Exposure Settings
Select the day/night switch mode, and configure the smart IR settings from this option. Figure 6-29 Day/Night Switch Day, night, auto, schedule, and triggered by alarm input are selectable for day/night switch. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 66 HLC: High Light Compression function can be used when there are strong lights in the scene affecting the image quality. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 67: White Balance
90 degrees, and set the rotate mode as on, you will get a normal view of the scene with 9:16 aspect ratio to ignore the needless © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 68 Figure 6-31 Day/Night Scheduled-Switch Configuration Interface Steps: 1. Click the time line to select the start time and the end time of the © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 69: Configuring Osd Settings
Configuration > Advanced Configuration > Image > OSD Settings Figure 6-32 OSD Settings 2. Check the corresponding checkbox to select the display of camera name, date or week if required. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 70: Configuring Text Overlay Settings
OSD position. Figure 6-34 Adjust OSD Location 7. Click Save to activate the above settings. 6.5.3 Configuring Text Overlay Settings Purpose: © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 71: Configuring Privacy Mask
Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the surveillance area from being live viewed and recorded. Steps: © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 72: Configuring And Handling Alarms
These events can trigger the linkage methods, such as Notify Surveillance Center, Send Email, Trigger Alarm Output, etc. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 73: Configuring Motion Detection
(3) Check the checkbox of Enable Dynamic Analysis for Motion if you want to mark the detected objects with green rectangles. Note: Select Disable for rules if you don’t want the detected © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 74 (6) (Optional) Click Clear All to clear all of the areas. (7) (Optional) Move the slider to set the sensitivity of the detection. 2. Set the Arming Schedule for Motion Detection. Steps: © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 75 Check the checkbox to select the linkage method. Notify surveillance center, send email, upload to FTP, trigger channel and trigger alarm output are selectable. You can specify the linkage method when an event occurs. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 76 Please refer to Section 7.2 for detailed information. Trigger Alarm Output Trigger one or more external alarm outputs when an event occurs. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 77 (5) Set the arming schedule and linkage method as in the normal configuration mode. (6) Click Save to save the settings. Day/Night Auto-Switch © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 78 Day/Night Scheduled-Switch (1) Draw the detection area as in the normal configuration mode. Up to 8 areas are supported. (2) Select Scheduled-Switch for Switch Day and Night Settings. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 79: Configuring Video Tampering Alarm
You can configure the camera to trigger the alarm when the lens is covered and take alarm response action. Steps: 1. Enter the video tampering Settings interface: Configuration > Advanced Configuration > Events > Video Tampering © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 80: Configuring Alarm Input
Please refer to Task 3 Set the Alarm Actions for Motion Detection in Section 6.6.1. 6. Click Save to save the settings. 6.6.3 Configuring Alarm Input Steps: 1. Enter the Alarm Input Settings interface: © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 81 No. to enable Preset Calling, Patrol Calling or Pattern Calling. 6. You can copy your settings to other alarm inputs. 7. Click Save to save the settings. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 82: Configuring Alarm Output
Refer to Task 2 Set the Arming Schedule for Motion Detection in Section 6.6.1. 5. You can copy the settings to other alarm outputs. 6. Click Save to save the settings. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 83: Handling Exception
Steps: 1. Check the Enable Line Crossing Detection checkbox. 2. Click the Draw Area, and a crossing plane will show on the image. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 84 4. Set the sensitivity [1~100]. 5. Choose another line crossing on the dropdown list to configure. Up to 4 line crossing areas are configurable. 6. Click Save to save the settings. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 85: Configuring Intrusion Detection
Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the object which can trigger the alarm, when the © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 86: Configuring Other Alarm
2. Choose to trigger alarm actions as Notify Surveillance Center, Send Email, Upload to FTP and Trigger Channel or trigger the Alarm Output. 3. Click Save to save the settings. 6.6.8 Configuring Other Alarm © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 87: Storage Settings
Before you start: To configure record settings, please make sure that you have the network storage device within the network or the SD card inserted in your camera. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 88: Configuring Nas Settings
(4) Click Save to add the network disk. 2. Initialize the added network disk. (1) Enter the HDD Settings interface (Advanced Configuration > Storage > Storage Management), in which you can view the © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 89 3. Define the quota for record and pictures. (1) Input the quota percentage for picture and for record. (2) Click Save and refresh the browser page to activate the settings. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 90: Configuring Recording Schedule
SD card (if supported) or in the network disk. Steps: 1. Enter the Record Schedule Settings interface: Configuration > Advanced Configuration> Storage > Record Schedule © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 91 The Pre-record time can be configured as No Pre-record, 5 s, 10 s, 15 s, 20 s, 25 s, 30 s or not limited. Post-record: The time you set to stop recording after the scheduled © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 92 If you want to record in different time sections, check the Customize checkbox. Set the Start Time and End Time. Note: The time of each segment can’t be overlapped. Up to 4 segments can be configured. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 93 Besides configuring the recording schedule, you have to configure the settings on the Motion Detection and Alarm Input Settings interfaces. Please refer to Section 6.6.1 and Section 6.6.4 for detailed information. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 94: Configuring Snapshot Settings
Copy. (4) Click OK to save the settings and exit the Edit Record Schedule interface. 6. Click Save to save the settings. 6.9 Configuring Snapshot Settings Purpose: © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 95 1) Configure the FTP settings and check Upload Picture checkbox in FTP Settings interface. Please refer to Section 6.3.8 Configuring FTP Settings for more details to configure FTP parameters. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 96 Taken for Motion Detection in Section 6.6.1, or Step 4 Configuring External Alarm Input in Section 6.6.4. 3) Check the Enable Event-triggered Snapshot checkbox. Figure 6-58 Snapshot Settings © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 97: Chapter 7 Playback
Chapter 7 Playback Purpose: This section explains how to view the remotely recorded video files stored in the network disks or SD cards. Steps: 1. Click Playback on the menu bar to enter playback interface. Figure 7-1 Playback Interface 2. Select the date and click Search. - Page 98 Drag the progress bar with the mouse to locate the exact playback point. You can also input the time and click to locate the playback point © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 99 Figure 7-4 Set Playback Time Figure 7-5 Progress Bar The different colors of the video on the progress bar stand for the different video types. Figure 7-6 Video Types © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 100: Chapter 8 Log Searching
Chapter 8 Log Searching Purpose: The operation, alarm, exception and information of the camera can be stored in log files. You can also export the log files on your demand. Before you start: Please configure network storage for the camera or insert a SD card in the camera. - Page 101 Figure 8-2 Log Searching 4. To export the log files, click Save log to save the log files in your computer. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 102: Chapter 9 Others
Chapter 9 Others 9.1 Managing User Accounts Enter the User Management interface: Configuration >Basic Configuration> Security > User Or Configuration > Advanced Configuration> Security > User The admin user has access to create, modify or delete other accounts. Up to 31 user accounts can be created. Figure 9-1 User Information Add a User ... - Page 103 2. Modify the User Name, Level or Password. 3. In the Basic Permission field and Camera Configuration field, you can check or uncheck the permissions. 4. Click OK to finish the user modification. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 104: Authentication
Configuration> Security > Authentication Figure 9-4 RTSP Authentication 2. Select the RTSP Authentication type basic or disable in the drop-down list to enable or disable the RTSP authentication. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 105: Anonymous Visit
3. Click Save to save the settings. There will be a checkbox of Anonymous by the next time you logging © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 106: Ip Address Filter
3. Select the type of IP Address Filter in the drop-down list, Forbidden and Allowed are selectable. 4. Set the IP Address Filter list. Add an IP Address © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 107: Security Service
5. Click Save to save the settings. 9.5 Security Service To enable the remote login, and improve the data communication security, the camera provides the security service for better user experience. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 108: Viewing Device Information
HDDs, Number of Alarm Input and Number of Alarm Output are displayed. The information cannot be changed in this menu. It is the reference for maintenance or modification in future. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 109: Maintenance
Figure 9-12 Reboot the Device 9.7.2 Restoring Default Settings Steps: 1. Enter the Maintenance interface: Configuration > Basic Configuration> System > Maintenance Configuration > Advanced Configuration> System > © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 110: Exporting / Importing Configuration File
Note: You need to reboot the camera after importing configuration file. 4. Click Export and set the saving path to save the configuration file in local storage. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 111: Upgrading The System
The upgrading process will take 1~10 minutes. Please don't disconnect power of the camera during the process, and the camera reboots automatically after upgrade. 9.8 RS-232 Settings The RS-232 port can be used in two ways: © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 112: Settings
The RS-485 serial port is used to control the PTZ of the camera. The configuring of the PTZ parameters should be done before you control the PTZ unit. Steps: 1. Enter RS-485 Port Setting interface: © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 113: Service Settings
For the cameras support IR LED, ABF (Auto Back Focus), Auto Defog, or Status LED, you can go to the hardware service, and select to enable or disable the corresponding service according to the actual demands. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 114: Appendix 1 Sadp Software Introduction
It displays the total number and information of the searched devices in the Online Devices interface. Device information including the device type, IP address, port number, gateway, etc. will be displayed. Figure A.1.1 Search Online Devices © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... -
Page 115: Search Online Devices Manually
2. Edit the modifiable network parameters, e.g. IP address and port number. 3. Enter the password of the admin account of the device in the Password field and click to save the changes. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 116 Serial code is a series of characters combined by the start time and the serial number of the device. 2. Input the code in the Serial code field and click Confirm to restore the default password. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
-
Page 117: Appendix 2 Port Mapping
Example: When the cameras are connected to the same router, you can configure the ports of a camera as 80, 8000, and 554 with IP address 192.168.1.23, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten... - Page 118 The port of the network camera cannot conflict with other ports. For example, some web management port of the router is 80. Change the camera port if it is the same as the management port. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 119 ALLNET GmbH Computersysteme declares that device ALL-CAM2305-LW is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The Declaration of conformity can be found under this link: www.allnet.de/downloads.html. ALLNET GmbH Computersysteme declares that device ALL-CAM2388-LVE is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC.
- Page 120 Maistrasse 2 82110 Germering Your request should include: (i) the name of the covered binary, (ii) the version number of the ALLNET product containing the covered binary, (iii) your name, (iv) your company name (if applicable) and (v) your return mailing and email address (if available).
- Page 121 (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 122 You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 123 License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 124 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 125 Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. <signature of Ty Coon>, 1 April 1989 Ty Coon, President of Vice © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 126 Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 127 Activities other than copying, distribution and modification are not covered by this License; they are © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 128 Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 129 Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 130 Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 131 THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
- Page 132 Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. <signature of Ty Coon>, 1 April 1990 Ty Coon, President of Vice That's all there is to it! © ALLNET GmbH Computersysteme 2015 - Alle Rechte vorbehalten Irrtum und Änderungen vorbehalten...
Need help?
Do you have a question about the ALL-CAM2305-LW and is the answer not in the manual?
Questions and answers