Pyle PWMA85UFM User Manual page 6

RECORD sub - menu to set up recording file mode, bit rate,
volume etc.
Wireless Headset Microphone
1. The wireless headset MIC has built-in lithium battery.
2. Press and hold POWER button to turn on the power of headset
MIC. The power indicator on headset MIC will light. And RF
indicator on the amplifier will light to indicate reception. Make
sure that the frequency of headset MIC is same as receiving.
3. Press VOL+ or VOL- to set the volume to a suitable level.
Charging
1. When the wireless headset MIC battery power is low it will be
powered off automatically. Connect supplied charger to the DC
in jack of the wireless headset MIC to charge the battery. Charge
indicator will light red. After the battery is fully charged, the
charge indicator will extinguish.
2. During operation of the amplifier if the battery icon on display
starts flashing amplifier battery power is low. Connect supplied
charger to the DC in jack on the amplifier to charge the battery.
Charge indicator will light red. After the battery is fully charged,
the charge indicator will light green. Charging time is 6-8 hours.
6