Page 1
DMS2.5 Basic : AIM-D00AN Model : AIM-D01AN Model Code : AIM-D01AN MIM-D01AN MIM-D01ACN MIM-D01AUN DMS2.5 CONTENTS 1. Precautions 2. Product Specifications 3. Disassembly and Reassembly 4. Program Update 5. Troubleshooting 6. PCB Diagram 7. Wiring Diagram Refer to the service manual in the GSPN(see the rear cover) for the more information.
5-2-9. Initialization Way when Admin Password is forgotten ................5-11 5-2-10. If the connection to DMS2 from the outside using internet is not working ......5-12 16. PCB Diagram ................................6-1 6-1. Main Board ........................................17. Wiring Diagram ................................ 7-1 Samsung Electronics...
– Be sure to ground the product if there is any danger of electric leakage due to water or moisture. ● Be sure to turn off the auxiliary power switch or pull out the power plug during replacement or repair of electric parts. – There is a danger of electric shock. Samsung Electronics...
Page 4
2-1. The Feature of Product 1) DMS 2.5(AIM-D01AN) ● Control solution product of SAMSUNG electronics for the efficient intergrated management & operation of the system air conditioner. ● Remote connection using internet caused by embedded web server, Possibility of connection to the Remote Management System(RMS).
Digital signal output(8CH) DI / DO DI(Dry Contact) Digital signal input(10CH) RS485 Connection port of other device besides outdoor unit. Communication Port Ethernet RJ45 connector (10/100Mbps) for Ethernet Etc. Data Backup SD CARD slot (SD card is needed additional purchase) Samsung Electronics...
Product specifications & features 2-3. System Organization S-NET 3 Internet DMS2.5 OnOff Controller SIM/PIM Outdoor Unit Power Meter Samsung Electronics...
- You can use various function remotely without extra program. (Unit condition monitoring, Function control, list of malfunction, schedule setting etc.) ● Linkage with upper-controller - You can use one central management system with upper-controller (S-net series) combining many DMS 2.5s. Samsung Electronics...
Disassembly and Reassembly 3. Disassembly and Reassembly Necessary Tools Item Remark +Screw Driver -Screw Driver Samsung Electronics...
Page 9
1) Unscrew 2 fixing screws. (Use +Screw Driver) 2) Detach the lower cover. 3) Press lower part of cable tie and detach the cable tie. 4) Pull the bead-core part of adapter. 5) Turn connector of adapter Counterclockwise. Samsung Electronics...
Page 10
DI/DO. 8) Unscrew at red circle part. (Use +Screw Driver) Ref.) The case of using additional Hole for install, detach from wall after detaching upper cover. 9) Push up DMS 2.5 and pull the DMS 2.5 front direction. Samsung Electronics...
Page 11
Procedure Remark 10) Unscrew 2 fixing screws at red circle. 11) Pick up the upper cover. Be careful not to damage LED on sub board. 12) As the shown picture, detach the cable between main and LCD board. Samsung Electronics...
3-2. Sub board Disassembly and Reassembly Parts Procedure Remark Common 1) As shown picture, detach the connector pulling upper direction. 2) Unscrew 4 fixing screw on sub board. (Use +Screw Driver) 3) Detach the sub board from DMS 2.5. Samsung Electronics...
2) Detach connector on main board, as a same way. 3) Detach connector for connecting display board. 4) Unscrew 4 fixing screw on main board. (Use +Screw Driver) 5) Push up the main board and detach it from DMS 2.5. Samsung Electronics...
Disassembly and Reassembly 3-4. Display board Disassembly and Reassembly Parts Procedure Remark Common 1) Unscrew 4 fixing screw on display board. (Use +Screw Driver) 2) Push up the display board and detach it from upper cover. Samsung Electronics...
2) Push [Reset] button once. 3) System is reset, Application is updated. 4) “remove SD card” is showed like the right picture, detach SD card pushing it one more time. 5) After remove SD CARD, restart by pushing reset button. Samsung Electronics...
Page 17
Program Update Parts Procedure Remark 6) After completing application update, confirm IP, time and regular operation . Samsung Electronics...
Set the pattern which fits to the control pattern you want. to 1? Isn't there any indoor units? Tracking Fail DMS 2.5 is unsuccessful in tracking. Try it again. Isn’t there any indoor unit as “Tracking Fail” is displayed? Samsung Electronics...
Is the connection between adapter Check the connection and power cable proper? Between adapter and power cable Is the output of adapter 12V? Change adapter Is the connection between Main Board Check the condition of adapter and adapter cable proper? Continue Samsung Electronics...
Page 20
Troubleshooting When DMS2.5 is not working(cont.) Continue Change Main Board Is DMS 2.5 working? Change Display Board Is DMS 2.5 working? Change Sub Board Samsung Electronics...
5-2-2. When the LCD Display is Not Working or the Backlight is Turing OFF Start Is the connection between Main Board Check the condition of cable connection and Display Board proper? Change Display Board Is LCD working properly? Change Main Board Samsung Electronics...
Troubleshooting 5-2-3. When the Static LED is Not Turning ON/OFF Start Is the connection between Main Board Check the condition of cable connection and Sub Board proper? Change Sub Board Is static LED working properly? Change Main Board Samsung Electronics...
Is the cable connection for RS485 proper? Check the condition of cable connection Is the polarity of RS485 cable correct? Check the polarity of RS485 cable [Left : +(or “A”), Right : – (or “B”)] ⓐ ⓑ Change Main Board Samsung Electronics...
Are the static LEDs for Ethernet proper? Change Main Board (Ehternet Linked, Ehernet Active) Linked : Constant Active : Flickering Check IP, Sub net mask and gateway address Are the addresses for ethernet correct? (Refer to install and service manual) Change Main Board Samsung Electronics...
Start Is the SD card inserted in the slot? Check the SD card slot Check the SD card. Is the SD card locked? (If SD card was locked, DMS 2.5 is not doing Backup data) Change SD card Samsung Electronics...
Troubleshooting 5-2-7. When the Button is Not Working Start Is the connection between Main Board Check the condition of cable connection and Display Board proper? Change Display Board Are buttons working properly? Change Main Board Samsung Electronics...
Less than 8 SIMs(When demand Are the devices connected to DMS 2.5 controller is connected, less than 7 SIMs), Less Satisfied with install limitation? than 8 DDCs. Connect using less than 128 DDC connection points or install additional DMS2. 5-10 Samsung Electronics...
Press the [▲],[▼] buttons under LCD window and select 8.Password Reset menu Press [Menu],[Set] buttons simultaneously after “RESET PASSWORD WAITING” message. If you Press [Set] button after “Are you sure?” message, the password is initialized as 1234. Samsung Electronics 5-11...
IP of a access user's PC or a networking device. Caution DMS2.5 encourages to use only in separate private network. Is the firewall of 443, 11000 port Request firewall of 443, 11000 port open to DMS 2.5? opening to network manager. 5-12 Samsung Electronics...
Wiring Diagram 7. Wiring Diagram Display Board 20 PIN cable Ass'y Connector Wire-Display 40 PIN Cable (DB93-08182A) Ass'y Connector Wire-Sub (DB93-08183A) Main Board Sub Board This Document can not be used without Samsung’s authorization. Samsung Electronics...