Bissell 1987 SERIES Manual page 5

Assembly
Your hand vacuum comes fully assembled.
Charging
***IMPORTANT*** ALWAYS TURN UNIT
OFF PRIOR TO CHARGING*
*failing to do so may result in battery not fully
charging
1. Insert charging adapter plug into the charging
port on the back of the unit.
2. Plug the adapter into the wall outlet. The
power LED lights will illuminate when charging.
Charge the unit completely for 5 hours prior to
first use.
NOTE: The charge light will turn RED during
charging and turn OFF once it is fully charged.
The adaptor may become warm during
charging – this is normal.
3. When the unit is fully discharged,
approximately 5 hours of charging time is
required for the battery to regain full capacity.
Operations
Using your hand vacuum
1. Unplug the machine from the charging adapter.
2. The power button is located on the top
of the handle.
3. Push power button ON.
Using the motorized brush
1. To attach the motorized brush, make sure
the unit is in the OFF position.
2. Firmly insert the motorized brush into the
nozzle of the hand vac until it snaps into place.
3. To detach, press the button on top of the
motorized brush and pull out.
4. The motorized brush can be used to
vacuum stairs, upholstery and other hard to
reach areas.
WARNING
Do not plug in your hand vacuum until
you are familiar with all instructions and
operating procedures.
1
Power Switch
2
www.BISSELL.com
3
5