Recon Robotics Scout XL User Manual

Robot

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Enlarged version

Warranty and Service

Warranty

The Manufacturer's Warranty documentation is available by email request from

support@reconrobotics.com

Updated Manuals and Translations

For the most current version of this manual, along with all available translations of

this manual, please visit our website at www.reconrobotics.com

To Request Service or Repairs

Call or e-mail your ReconRobotics representative or reseller to describe the

problem you are experiencing and request a Return Material Authorization (RMA)

tracking number. In addition to your original sales receipt, you will need to provide

the unit's serial number, your return shipping address, email address and a daytime

telephone number.

ReconRobotics, Inc

5251 W 73rd Streeet, Ste A

Edina, MN 55439

Phone: 1-866-697-6267 or 952-935-5515

Fax: 952-935-5508

Website: www.reconrobotics.com

For customer service, call 866-398-1921

Or email support@reconrobotics.com

Saving Lives at the Tip of the Spear™

Recon Scout XL

User Manual

Version 1.03 November 2016

R001261

Table of Contents

Summary of Contents for Recon Robotics Scout XL

Page 1 5251 W 73rd Streeet, Ste A Edina, MN 55439 Phone: 1-866-697-6267 or 952-935-5515 Fax: 952-935-5508 Website: www.reconrobotics.com For customer service, call 866-398-1921 Or email support@reconrobotics.com Recon Scout XL Recon Scout XL User Manual User Manual Version 1.03 November 2016 R001261...
Page 2 P r o d u c t I d e n t i f i c a t i o n This manual applies to the ReconRobotics Recon Scout® XL and OCU II. ©2016 ReconRobotics Notice:  Lithium Polymer batteries are volatile. Only charge the robot and OCU II with chargers provided by ReconRobotics.
Page 3: Table Of Contents
Table of Contents Table of Contents Safety Information & Warnings Safety Information & Warnings ©2016 ReconRobotics F C C G u i d el i n e s a n d L o g b o o k * i - i v Read these warnings before charging or using your robot or OCU II.
Page 4: Recon Scout Xl Kit Inventory
 One (1) Volume Control Adaptor If your issue cannot be resolved remotely, ReconRobotics may provide loaner equip- ment for Recon Scout XL kits during the repair process.  One (1) Carrying Case ...
Page 5: Recon Scout Xl Robot Components
ReconRobotics immediately. (See Warranty and Repair, pg. 17) If you feel that your Recon Scout XL robot or OCU II is not running for its complete battery life on a full charge, there is a simple test you can run to check the performance: ...
Page 6: Ocu Ii Components
Troubleshooting OCU II Components Troubleshooting OCU II Components ©2016 ReconRobotics ©2016 ReconRobotics I’ve been using the OCU II for an extended period of time. Now the screen is black when I power on, and I cannot control the robot. What could be wrong? An OCU II should have the following components: The battery is likely drained, you will need to recharge the OCU II as described in the Two Antennas...
Page 7: Ocu Ii Audio/Video Out Capabilities
A/V Out Cabling Package for more information. The Recon Scout XL robot is water resistant to incidental immersion in 1 foot (30 cm) of water for up to five minutes. Do not use third-party cables with the A/V Out jack on the OCU.
Page 8: Quick Start Guide
OCU II before deploying. ReconRobotics service personnel. (See Warranty and Repair, pg. 17) If using headphones with a Recon Scout XL robot, plug in and test the headphones at a low volume before using. Deploy robot into target environment.
Page 9: S E T U P
©2016 ReconRobotics Setting up the OCU II The Recon Scout XL robots and OCU IIs are designed to provide mission critical information in harsh or hazardous environments, but no product is indestructible. In Rotate antennas to an upright position as shown. The...
Page 10: C H Ar G Er S
Instructions for Use: Chargers Instructions for Use: Chargers ©2016 ReconRobotics ©2016 ReconRobotics AC Dual DC Battery Charger Reading Charge Indicator Lights on Battery Chargers Turn off OCU II and insert activation pin into robot to deactivate before charging. Your kit may include one or both of these chargers. When plugged into an active Plug AC electrical cord into the charger.