Samsung HW-H550 User Manual page 16

functions
To connect the Soundbar to a Sluetooth device
Check if the BJuetooth device supports the Biuetooth compliant stereo headset function_
@
Connect
@
@
Bluetooth device
1 Press the SOURCE button on the remote control of the Soundbar to display the BT message_
• You wilJ see BT READY on the front disp ay of the Soundbar,
Z On the Bluetooth device you want to connect, open the Bbetooth menu_ (Refer to the Bbetooth device's
user manual_)
3_Select the Stereo headset menu on the Bbetooth device_
• You will see a ist of scanned device£
4_ Seect "[Samsung] SoundbaP from the isL
• When the Soundbar is connected to the B uetooth device, it will disp ay Device name '_ BT on the front disp ay_
• If the B!uetooth device has failed to pair with the Soundbar, delete the previous "[Samsung] SoundbaP found by
the Biuetooth device and have it search for the Soundbar again_
• If the Soundbar is in another mode (except TV mode), you can shift it to Biuetooth mode using your smart
device_
5_ Piay music on the connected device_
• You can isten to the music paying on the connected B uetooth device over the Wire ess Audio o Soundbar
system_
• In BT mode, Repeat functions are not availab e_ For some B uetooth device, PayiStopiNextiPrev function are not
availabie_
You may be required to enter a PIN code (password) when connecting the Bbetooth device to the
Soundbar_ If the PIN code input window appears, enter (0000>_
The Soundbar supports SBC data (44J kHz, 48kHz)_
The AVRCP feature is supported_
Connect only to a Bbetooth device that supports the A2DP (AV) function_
You cannot connect to a Bluetooth device that supports only the HF (Hands Free) function_
Only one Bluetooth device can be paired at a time_
Once you have turned off the Soundbar and the pairing is disconnected, the pairing will not be
restored automatically_ To reconnect, you must pair the device again_
The Soundbar may not run the Bbetooth Search or Connection functions properly in the following
cases:
If there is a strong electrical field around the Soundbar_
If several Bbetooth devices are simukaneously paired with the Soundbar_
If the Bluetooth device is turned off, not in place, or mdfunctions_
Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas
stoves use the same frequency range as the Bluetooth device, which can cause electdc interference_
Once paired the device,on ARC!DIN!USBiHDMIiAUX mode,seiect "[Samsung] SoundbaP from the iist
will automaticalb, change to BT mode_
15