connections
ATTACHING
THE TOROiDAL FERRiTE CORE TO THE POWER CORD OF
THE SUBWOOFER
Attaching the Toroidd femte core to the power cord of the
subwoofer hebs prevent RFinterference from radio signaB
1 Pull the fixing tab of the Toroidal fernte core to open it
2 Make two loops around the core with the power cable of the
subwoofer
3. Attach the Toroidai ferrite coreto the Subwoofer power cord as the
figure shows, and then pressit unti! it c!ick£
LOOPING THE POWER CABLE AROUND THE TOROiDAL CORE
Lift up to retease the iock and open the core_
dose the iock_
Make two ioops around the core with the power
cabte_
(Start winding 2 to 4 inches [5-10 cm]
away from the core)_
12