Advertisement
Manufacturers of Process
Controls and Instrumentation
Function:
The RCI-800-RF9 is a bi-directional data communication
system that exchanges the status of 8 dry contact inputs
and 8 analog inputs between a master and one or more
remote units. A basic system consists of one master
station and one remote station each with 8 dry contact
and 8 analog inputs and 8 'C' relay contact and analog
outputs. All signals are bi-directional so that data may be
read from the remote station and sent to it.
The license-free spread-spectrum radio technology
allows small systems to be set up with very little effort and
at low cost.
The technology ensures high
communication reliability even in RF-intensive
environments.
All units are sold without antennas. Pribusin carries a
complete assortment of antennas and accessories.
Model: RCI-800-RF9
Remote Control Signal Interface
With 900MHz Radio Frequency Link
Standard Features:
Bi-directional Communication using License-free
900MHz Radio Band
Spread-Spectrum Radio Technology Provides
Reliable Communication
Re-Transmission & Error Correction Algorithms
ensure Accurate Data Transmission
8 Dry Contact and 8 Analog Inputs
8 'C' Relay Contacts and 8 Analog Outputs
Point-to-Point or Host-to-Multipoint Topologies
No Calibration Required
Microprocessor Controlled for High Accuracy
Power: 117 VAC 50/60 Hz (Optional 24 VDC)
High Noise Rejection
Options:
- A: 24VDC Power
- B: 240VAC Power
- N12: NEMA 12 Enclosure
Specifications:
Media: 900MHz Spread-Spectrum Radio
Range: up to 1500ft indoors with omnidirectional antenna
Protocol: MODBUS ASCII, 9600 BAUD
RF Connector: N-Female (Bottom of Enclosure)
Radio Power Output: 100mW, 1W (selectable)
Operating Temperature: -4°F to +140°F (-20°C to +60°C)
Relay Contacts: 10A 1/8Hp @ 125VAC
Power: 117 VAC, 60/50 Hz, 24VDC Available
Enclosure: NEMA4X (NEMA12 available as an option)
up to 12 miles line-of-sight with directional antenna
6A 1/8Hp @ 277VAC
Page J19
Advertisement
