YardCraft Fairmont Garden Shed Assembly Instructions Manual page 22

Locate first two pieces of OSB
roofing pieces.
Push first section tight against and align flush with bottom edge of OSB of gable overhang, and attach to rafter
using 2" nails.
Ensure OSB is centered on rafter
and properly aligned with rafter at
bottom edge and attach at bottom
corner.
Slide next OSB section tight against first OSB section and install align
splice into rafter. Next attach at bottom to each rafter (do not attach to
end rafter until next step.
Install OSB Roofing
Ensure OSB is centered on rafter
and nail at top corner.
Mark off OSB every 2'.
Attach bottom edge of OSB to raf-
ters using 2" nails (note do not nail
until later).
CAUTION: DO NOT STAND
ON OSB UNTIL IT IS
PROPERLY FASTENED!
Pull gable section tight against OSB
and attach along edge.