Advertisement
EC - Declaration of Conformity
We declare that our products (lighting equipments) comply with the following
specification and bears CE mark in accordance with the provision of the
Electromagnetic Compatibility (EMC) Directive 89/336/EEC.
EN55014-2: 1997 A1: 2001, EN61000-4-2: 1995; EN61000-4-3: 2002;
EN61000-4-4: 1995; EN61000-4-5: 1995, EN61000-4-6: 1996,
EN61000-4-11: 1994.
&
Harmonized Standard
EN60598-1: 2000+ALL: 2000+A12: 2002
Safety of household and similar electrical appliances
Part 1: General requirements
VP-600
19A
V Power
VP-600
User Manual
Please read the instructions carefully before use
Advertisement
Table of Contents
Related Manuals for VISIO VP-600
Summary of Contents for VISIO VP-600
- Page 1 VP-600 EC - Declaration of Conformity V Power We declare that our products (lighting equipments) comply with the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 89/336/EEC. EN55014-2: 1997 A1: 2001, EN61000-4-2: 1995; EN61000-4-3: 2002;...
-
Page 2: Table Of Contents
VP-600 VP-600 9.2 RJ45 Connection TABLE OF CONTENTS 1. Safety Instruction 2. Features DMX Input, Output LED module Input RJ45 Connector RJ45 Connector 3. Technical Specification Front view of the Connector Front view of the Connector 4. Installing Instructions 5. Main Function 6. - Page 3 VP-600 VP-600 1. Safety Introductions adapter-cable. 2. At last unit, the DMX cable has to be terminated with a terminator. Solder a 120 ohm 1/4W resistor between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug Please read the User Manual carefully as it includes important information regarding and plug it in the DMX-output of the last unit.
-
Page 4: Features
Comes with 3 chase groups, each group has 8 chases (3 editable chases); and each chase can have up to 42 scenes. For editing the chases, Visio has developed a software (option) that enables you to edit the chases easily. -
Page 5: Installing Instructions
Ensure that installation place is enough ventilated. 20 Channels: V Power could control the LED fixtures such as V Aqua, V Bar, V Ceiling, V Inground, 11 Channels: V Net, V Wall and CW36, the VP-600 power output is 600 watt (10×60W). -
Page 6: Main Function
VP-600 VP-600 5. Main Function 40 Channels: To select any function, press MENU button until the required one is shown on the display. Select the function by ENTER button and the display will blink. Use DOWN and UP button to change the mode. Once the required mode has been selected, press ENTER button to setup. - Page 7 VP-600 VP-600 8. DMX512 Configuration The main functions are shown below: 43 Channels:...
- Page 8 VP-600 VP-600 Address stops blinking or storing automatically 8 seconds later. To go back to the Press the MENU button up to when the Address is shown on the display. main functions without any change press the MENU button again. Please Pressing ENTER button and 1 will blink.
-
Page 9: Rear View
VP-600 VP-600 Edit Chase (only chase number 6~8 are editable) 6.2 Rear View Press the MENU button up to when the Edit Chase is showing on the display. Press ENTER button and 1 will blink, use UP/DOWN button to choose group 1, 2 or 3, press ENTER button to setup and use UP/DOWN to... - Page 10 VP-600 VP-600 6. Overview LCD Backlight Press the MENU button up to when the LCD Backlight is showing on the 6.1 Front View display. Press ENTER button to choose Always On or Auto Blackout. To go back to the functions please press the MENU button.
Need help?
Do you have a question about the VP-600 and is the answer not in the manual?
Questions and answers