Download Print this page

Ingolabs Pp2 Manual page 4

Advertisement

Gpstracker.net.in
Patterning
SOS
Working State
GPS Off
GPS working,not fix
GPS working and fixed
GSM not register
GSM registered
GPRS connected to server
GPRS send data to server
Charging
Device power off
Firmware remote upgrade
5.2 Power on/off
Power on: Before power on, please insert the effective SlM card. Then long press the power key for over
5 seconds, the device will power on, then you will see screen display.
Power off: When the device power on, long press key for over 5 seconds, the device will power off, then
you will see screen off.
5.3 Location inquires
5.3.1 Get address by SMS from server
Command: where#
Screen Status Description
Means GPS model is working, and not fix
(If the position no display, means GPS not working)
Means GPS model is working, and fixed
(If the position no display, means GPS not working)
Means GSM signal level, five levels(0, 1、2、3、4)
Means no SIM card
Means battery level
Means device power on and charging
Means device power off and charging
Means device power off and battery charged full
Means sos calling
LED Twinkle Description
GPS LED off
GPS LED Twinkle every second
GPS LED light on
GSM LED Twinkle every second
GSM LED Twinkle every 5 seconds
GSM LED off
GSM LED Twinkle every 0.05 seconds
GPS and GSM LED Twinkle alternately, it will restore when
charged full
GPS and GSM LED both light on and both off after a few seconds
GPS and GSM LED both light on and both off after upgrade
success
Description
Twinkle Description
Freedom is lost now...!

Advertisement

loading