New And Changed Information - Cisco Nexus 5000 Series Configuration Manual

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus
5000 Series NX-OS Security Configuration Guide.
•
New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5000
Series NX-OS Security Configuration Guide.
The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/products_installation_and_configuration_guides_list.html
To check for the latest information about Cisco NX-OS, see the Cisco Nexus 5000 Series and Nexus 2000
Series NX-OS Release Notes available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/prod_release_notes_list.html
This table summarizes the new and changed features documented in the Cisco Nexus 5000 Series NX-OS
Security Configuration Guide, and tells you where they are documented.
Table 1: New and Changed Security Features for Cisco NX-OS Release 4.1(3)N2(1)
Feature
IP ACL to mgmt0
Global source
interface for
TACACS+
Global source
interface for RADIUS
OL-20919-01
New and Changed Information, page 1
Description
Allows you to apply an IP ACL to the mgmt0
interface.
Allows you to configure the global source
interface for all TACACS+ server groups that
are configured on the device.
Allows you to configure the global source
interface for all RADUS server groups that are
configured on the device.
C H A P T E R
Cisco Nexus 5000 Series NX-OS Security Configuration Guide
1
Changed Where Documented
in
Release
4.1(3)N2(1) Configuring Access
Control Lists
4.1(3)N2(1) Configuring
TACACS+
4.1(3)N2(1) Configuring RADIUS
1