Page 1
LINE 10 LINE 12 LINE 14 LINE 16 OUT IN PEAK PEAK PEAK PEAK PEAK PEAK PEAK PEAK PEAK PEAK 16 CH MIXING CONSOLE M1636FX TRIM TRIM TRIM TRIM TRIM TRIM TRIM TRIM TRIM TRIM M1636FX 75Hz 75Hz 75Hz 75Hz...
M1636FX / M2436FX Introductions Introduction GROUP OUTPUT CONTROL ROOM 9/10 11/12 13/14 15/16 TAPE IN REC OUT LINE 13 LINE 15 LINE 14 LINE 16 AUX RETURN AUX 1 SEND FOOT SWITCH MAIN OUTPUT LINE LINE LINE LINE LINE LINE...
- AUX RETURN AND 2 AUX SEND For convenient use of external equipment, AUX SEND and AUX RETURN function are provided. - 8 MONO (M1636FX), 16 MONO (M2436FX) CHANNEL INSERT. - CHANNEL EQUALIZER The 3 band equalizer are designed for ±15dB control on MONO input channels and 4 band equalizer for stereo input channels-- ±15dB control on HF&LF, ±12dB control on MID HF&...
M1636FX / M2436FX Front Panels Front Panels Controls 1. CHANNEL CONTROL SECTION (1). PEAK LED INDICATOR This LED indicators let you check the level of the signal input to the channel. The peak indicator lights MONO MONO STEREO when the input signal reaches 5dB below the channel’s STEREO clipping point.
Page 7
M1636FX / M2436FX Front Panels Front Panels Controls This indicator lights when the PFL switch is turned on. (5). AUX 1 AND AUX 2 CONTROLS This AUX1 knob controls the signal level that the chan- (11). PFL SWITCH nel sends to the AUX1 bus; the AUX2 knob controls When these switch is depressed, the channel input the signal level to the AUX2 bus.
Page 8
M1636FX / M2436FX Front Panels digital effect to the AUX1and AUX2 buses. 1.MAIN CONTROL SECTION (4). DSP ON/OFF SWITCH 16 CH MIXING CONSOLE This switch turns the internal digital effect on/off. M1636FX (5). PFL SWITCH PROGRAM Set this switch on if you wish to output the effect signal SELECT to the PFL bus.
Page 9
EQ is on and when the switch is up, the EQ is bypassed. 21. MAIN STEREO EQUALIZER The M1636FX/M2436FX provide a seven-band MAIN STEREO EQUALIZER allowing you to control the frequency response of the MAIN stereo mix bus signal.
Page 10
M1636FX / M2436FX Front Panels Front Panels Controls 1. INPUT/OUTPUT CONNECTORS GROUP OUTPUT CONTROL ROOM 9/10 11/12 13/14 15/16 TAPE IN REC OUT LINE 13 LINE 15 LINE 14 LINE 16 AUX RETURN AUX 1 SEND FOOT SWITCH MAIN OUTPUT...
Page 11
M1636FX / M2436FX Front Panels Front Panels Controls Use these jacks when you want to connect a CD or (12). PHONES JACK DAT directly to the mixer for monitoring. Connect for headphones. This is stereo phone-type You can adjust the signal level using the TAPE IN output jack.
AC ADAPTOR IN POWER DESIGNED AND ENGINEERED IN KOREA 1. AC ADAPTOR IN CONNECTOR Connects to the included PA-M1224 For M1636FX / PA-M2436 For M2436FX power adaptor Use only the PA-M1224 For M1636FX / NOTE: PA-M2436 For M2436FX adaptor included with this mixer.
‘technical earth’ to replace the incoming ‘noisy earth’. However, always consult your local electricity supply authority to ensure that safety regulations are not being infringed. Connections HPA products are wired to refl ect accepted wiring practices used throughout the world. Balanced XLR connectors are wired as described: Pin #1 Shield...
Page 14
E. SHIELD/GND Unbalanced PHONE Shield/GND high impedance: most (Standard Phone) hi-fi equipment. Connector and cable confi gurations recommended for use with the M1636FX/M2436FX. These cables are based on the use of auxiliary equipment that is isolated from the AC power mains.
M1636FX / M2436FX Applications Applications Setup Procedure Before connecting to microphones and instruments, be sure that all devices are turned off. Also be sure that all of the mixer’s channel fader and master control faders are set all the way down.
Page 16
M1636FX / M2436FX Application Sound Reinforcement For Live Performance Monitor Speakers (Internal) Guitar Power Amp CD,Cassette,or DAT Recorder Microphone Microphone CD Player GROUP OUTPUT CONTROL ROOM 9/10 11/12 13/14 15/16 TAPE IN REC OUT LINE 13 LINE 15 LINE 14...
Peak: An indicator for each channel turns on when the pre-channel fader signal is 5dB below Channel Indicators clipping. Phantom Power +48V DC (Balanced input) Included Accessory Power adaptor PA-M1224 For M1636FX / PA-M2436 For M2436FX USA and Canada: 120V AC, 60Hz Europe: 230V AC, 50Hz Power Source England and Australia: 240V AC, 50Hz...
Page 19
33Ω Stereo Phone Jack Specifi cations and descriptions in this owner’s manual are for information purposes only. HPA reserves the right to change or modify products or specifi cations at any time without prior no- tices. Since specifi cations, equipment or options may not be the same in every locale, please...
fi rst by locating the appropriate country which the product was purchased in, then by locating the product type. To obtain specifi c warranty information and available service locations contact HPA directly or the author- ized HPA Distributor for your specifi c country or region.
Need help?
Do you have a question about the M1636FX and is the answer not in the manual?
Questions and answers