Page 1
Owner’s Manual Professional Stereo Compact Mixer 3 / 4 5 / 6 7 / 8 TAPE IN REC OUT LINE 7 M822FX CONTROL ROOM FOOT SWITCH LINE 8 LINE LINE LINE 3 LINE 5 LINE 7 HEADPHONE MONO MONO MONO...
MAIN L/R Welcome Thank you for purchasing M822FX /M1022 Mixing Console. The M822FX / M1022 provides an excellent balance of operability, functionally and ease of use. In order to take full advantage of the M 822FX/ M1022 capabilities and enjoy years of trouble - free use, please read this manual carefully.
M822FX / M1022 Features Features -2 MONO ( M1022/M822FX) INPUT AND 3 STEREO ( M822FX ) ,4 STEREO ( M1022 )INPUT Any sound source of microphones, cassette decks, electronic guitars, organs can be applied to the chan- nel input. - MAIN L/R OUTPUT Main L/R are provided for convenient use.
The channel signals mixed by this bus have their overall level set by the EFX SEND Control to the EFX SEND jack on the front panel. The EFX bus signal is also fed into the internal digital signal processor(only M822FX). Since this control is placed after the channel fader ffected...
1.MAIN CONTROL SECTION (7). STEREO RETURN CONTROL Adjust the level of the mixed L/R signal sent from the RETURN * No. 1~4 are applied only to M822FX jack (L (MONO) and R) to the Main L/R bus. (8). TAPE IN CONTROL...
You use this jack, for example, to connect to an external effector are provided phone type and RCA pin type. (8). FOOT SWITCH JACK (Applied only to M822FX ) (4). RETURN L (MONO), R Jack This phone input jack can connect to the foot switch.With the These are unbalanced 1/4”...
Page 9
M822FX / M1022 Front Panel Controls Front Panel Controls (9). MAIN L/R OUTPUT JACKS These jacks deliver stereo output of the mixer signal. You use driving your main speakers. You also use these jacks when you wish to record the signal utilizing the level control applied by the main volume in the main Control section.
M822FX / M1022 Rear Panel Controls Rear Panel Controls 8 CH MIXING CONSOLE M822FX AC ADAPTOR IN POWER DESIGNED AND ENGINEERED IN KOREA 1. AC ADAPTOR IN CONNECTOR Connects to the included power adaptor. NOTE:Use only the adaptor included with this mixer.
M822FX / M1022 Points to Remember Points to Remember - Do not disconnect the mains earth from each piece of equipment. This is needed to provided both safety and screen returns to the system star point. and/or other equipment, to avoid earth loops.
Page 12
M822FX / M1022 Connections Connections CONNECTOR AND CABLE CONFIGURATIONS REMOTE DEVICE REMOTE SIDE OF CABLE DESCRIPTION CABLE (Connector Type) White(Red)/HIGH Black/LOW A. XLR** Shield/GND (XLR) Floating or Balanced low impedance: most professional equipment line in and line out, microphones. White(Red)/HIGH Black/LOW B.
M822FX / M1022 Applications Applications Setup Procedure Before connecting to microphones and instruments, be sure that all devices are turned off. Also be sure that all of the For each connection, connect one end of the cable to the relevant microphone or instrument and connect the other end to the appropriate input jack on the mixer.
M822FX / M1022 Service Service Procedures tion of this manual. Schematic Parts List Variations and Options Variations Options No optional items are available for this product. Warranty Warranty terms and conditions vary by country and may not be the same for all products. Terms and con-...
Need help?
Do you have a question about the M822FX and is the answer not in the manual?
Questions and answers