5.
Ralink Wireless Utility (RaUI)
5.1
Start
5.1.1 Start RaUI
When starting RaUI, the system will connect to the AP with best signal strength without setting a pro-
file or matching a profile setting. When starting RaUI, it will issue a scan command to a wireless NIC.
After two seconds, the AP list will be updated with the results of a BSS list scan. The AP list includes
most used fields, such as SSID, network type, channel used, wireless mode, security status and the
signal percentage. The arrow icon indicates the connected BSS or IBSS network. The dialog box is
shown in Figure 2-1.
There are three sections to the RaUI dialog box. These sections are briefly described as follow.
Button Section: Include buttons for selecting the Profile page, Network page, Advanced page, Statis-
tics page, WMM page, WPS page, the About button, Radio On/Off button and Help.
Figure 2-1-1 RaUI section introduction
Figure 2-1-2 Button section
CNet Technology Corporation.
www.CNetusa.com