Next 789873 Assembly Instructions Manual

IMPORTANT - RETAIN FOR FUTURE
REFERENCE - READ CAREFULLY.
Tools Needed
Helpline
If you have any problems with this product or require
any replacement fittings please contact Customer
Services Tel: 0844 844 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found
to be faulty. Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of two persons is required to assemble this product.
• Children are likely to play, bounce, jump and climb on beds, therefore the child's bed should not be placed too
closeto other furniture or windows, and should be placed either tight to any wall or have a gap of 300mm between the
wall and the side of the bed
• This cot has an adjustable height base. The lowest position is the safest and the base should always be in
thisposition as soon as the baby is old enough to sit up.
• To prevent injury from falls, please ensure that you no longer use this cot for a child when that child it is old
enoughto climb out of the cot.
• The thickness of the mattress you use in this cot must be such that the internal height (surface of the mattress to the
upper edge of the cot frame) is at least 500mm in the lowest position of the cot base and at least 200mm in the
highest position of the cot base.
• When fitted, there must be a maximum gap of 30mm between the mattress sides and ends and the cot sides and
ends.
• All assembly fittings should be tightened properly before use and should be periodically checked and re-tightened if
required
• The line visible on the inside of the cot frame indicates the maximum thickness of the mattress to be used with this
cot.
• WARNING: Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, etc. in
nearvicinity of the cot.
• WARNING: Do not place this child's bed near heat sources, windows and other furniture
• WARNING: Do not leave anything in the cot or place the cot close to another product, which could provide a foothold
or present a danger of suffocation or strangulation, e.g., strings, blind/curtain cords, etc.
• WARNING: Do not use more than one mattress in the cot .
• WARNING: Do not use the cot / bed if any part is broken, torn or missing and use only spare parts approved by the
manufacturer.
789873 LITTLE HADBURY COT BED 789873 LITTLE HADBURY COT BED 789873 LITTLE HADBURY COT BED 789873 LITTLE HADBURY COT BED
ASSEMBLY INSTRUCTIONS.
Page 1 of 6