Table of Contents
Advertisement
Mechanical Installation
The unit may be mounted horizontally or vertically.
The installation process for the FDPWRU28-2 is accomplished with minimal hardware,
including these installation steps:
1. Cut a mounting hole the appropriate size for the unit in the mounting surface.
2. Attach the Molex 2-pin female connection and place the FDPWRU28-2 into
3. Secure the unit with 6-32 machine screws. Maximum screw protrusion into
© 2017 FDS Avionics Corp.
All Rights Reserved.
Document Number:
MAN – FDPWRU28-2
See " FDPWRU28-2 Drawing"
* FDS highly recommends receiving the product first to ensure the best
possible fit during installation.
the mounting hole.
the unit is .50 inch.
Revision Date:
Rev:
D
Page 5 of 9
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
05/03/2017
Advertisement
Table of Contents
