Page 3 of 9 General Information The FDPWRU28-2 is used to convert 28V power from the aircraft to 5.2V power which can be used to power and/or charge small auxiliary items. Each unit has 4 Amps of total charging capacity. There are two output connectors rated 5.2V @ 2 Amps continuous each. Two devices may be charged with full 2 Amps of charging current at the same time or one device may be charged with up to 4 Amps continuous current.
* FDS highly recommends receiving the product first to ensure the best possible fit during installation. 2. Attach the Molex 2-pin female connection and place the FDPWRU28-2 into the mounting hole. 3. Secure the unit with 6-32 machine screws. Maximum screw protrusion into the unit is .50 inch.
05/03/2017 MAN – FDPWRU28-2 Page 7 of 9 Technical Support Should you have any questions concerning this product or other FDS Avionics Corp. products, please contact our Product Support representatives at (470) 239-7421. FDS Avionics Corp. 6435 Shiloh Road Alpharetta, GA 30005...
Limited Warranty All FDS Avionics Corp. products are warranted to be free from material or manufacturing defects for a period of 24 months from the date of shipment for General Aviation customers or 12 months from the date of shipment for Government/Special Mission customers.