Adding The Camera To The System; Adding Camera To System With Security Shuttle - home8alarm IPC2203 User Manual

2. Powering the camera with PoE (Power over Ethernet):
If the user prefers to power the camera over Ethernet, please verify that a PoE Injector and two RJ45 cables
are available (PoE Injector and RJ45 cables are not included in the package).
Connect the PoE Injector to your router via RJ45 cable that links with the security shuttle. Meanwhile,
connect the PoE Injector to the camera's Ethernet interface with another RJ45 cable that will deliver DC
power as well as transfer data. Lastly, power on the PoE Injector.

3.3 Adding the Camera to the System

Before you begin using the camera, it will need to be added to the system first. For details, see the
subsection below.
Important: If you are unable to add the camera to the system or the app shows a message telling you to
reset the camera, see Chapter 6 - Resetting the Mini Outdoor HD camera for details.

3.3.1 Adding Camera to System with Security Shuttle

To activate the camera with the security shuttle, complete the following steps.
Note:

Make sure the Security Shuttle is powered on and connected to your router.
Mini Outdoor Full HD Camera
7
V1.0 2017