Table of Contents
Advertisement
Chapter 6. Resetting the Mini Outdoor Full HD camera
When you are unable to add the camera to the system, or the camera is not working properly, you can try to
reset the device. The app may also display a message telling you to do so.
Resetting the camera when your camera is not working properly.
Method 1: Remove the camera from the system. Please see Section 4.9 – Restart/Remove IP Camera for
details.
Method 2: Use the wrench to open up the lid located on the bottom of the camera. Make sure the camera is
powered off first, press and hold the RESET button, and then power on the camera. Continue holding down
the RESET button for around 10 seconds until the IR LED goes off.
Resetting the camera when you are unable to add the camera to the system.
Use the wrench to open up the lid located on the bottom of the camera. Make sure the camera is powered
off first, press and hold the RESET button, and then power on the camera. Continue holding down the RESET
button for around 10 seconds until the IR LED goes off.
Mini Outdoor Full HD Camera
V1.0 2017
34
Advertisement
Table of Contents
