Page 1
MIP 1664 MPEG/IP Streamer Startup Manual February 2015 Form 7525A www.sencore.com | 1.605.978.4600 Revision 1.1...
Page 2
Inquiries should be made directly to those companies. This document may also have links to third-party web pages that are beyond the control of Sencore. The presence of such links does not imply that Sencore endorses or recommends the content on those pages. Sencore acknowledges the use of third-party open source software and licenses in some Sencore products.
Page 3
Become familiar with the equipment you are working with and observe the following safety precautions. Every precaution has been taken in the design of the MIP 1664 to ensure t hat it is as safe as possible. However, safe operation depends on you the operator.
MIP 1664 – Startup Manual 1.1 Introduction Thank you for purchasing your Sencore MIP 1664. This unit is a powerful tool that can be used to stream hundreds of IP services for any number of different uses. This guide is meant to provide a quick overview of how to install, setup, and maintain the MIP 1664 MPEG/IP Streamer.
Page 7
MIP 1664 – Startup Manual IP Streamer Connections The output connections for the analyzer are located on the rear of the MIP 1664. Depending on the options ordered, these may include one or two IP/SFP outputs. 1.5 MIP 1664 Startup After completing all of connections, turn on the power of the MIP 1664 using the power button.
Need help?
Do you have a question about the MIP 1664 and is the answer not in the manual?
Questions and answers