Charging Your Asus Mobile Dock - Asus ZENPAD E-Manual

Charging your ASUS Mobile Dock

To charge your ASUS Mobile Dock:
1. Connect the micro USB cable to the power adapter.
2. Plug the power adapter into a grounded power outlet.
3. Plug the micro USB connector into your ASUS Mobile Dock.
NOTE: The input voltage of your ASUS Mobile Dock is DC 5.2V, 1A, 5W.
IMPORTANT!
• Use only the power adapter and USB cable of ASUS ZenPad 10 to charge your ASUS Mobile Dock.
Using a different power adapter and cable may damage your device.
• Peel the protective film off from the power adapter and USB cable before charging your ASUS Mobile
Dock to prevent risk of injury.
• Ensure that you plug the power adapter to the correct power outlet with the correct input rating.
The output voltage of this adapter is DC 5.2V, 1A.
• When using your ASUS Mobile Dock while plugged-in to a power outlet, the grounded power outlet
must be near the unit and easily accessible.
• Do not use or expose your ASUS Mobile Dock near liquids, rain, or moisture.
• Do not use your ASUS Mobile Dock near heating equipment or in places where there is likelihood of
high temperature.
• Keep your ASUS Mobile Dock away from sharp objects.
• Do not place heavy objects on top of your ASUS Mobile Dock.
NOTE:
• Charging through the USB port of a computer may take longer time to complete.
• If your computer does not provide enough power for charging your ASUS Mobile Dock, charge your
device via the grounded power outlet instead.
Chapter 1: Get your Zen ready!
25