Bonnet - Cadillac XT5 2017 Owner's Manual

Hide thumbs Also See for XT5 2017:
Table of Contents

Advertisement

Caution
Even small amounts of
contamination can cause damage to
vehicle systems. Do not allow
contaminants to contact the fluids,
reservoir caps, or dipsticks.

Bonnet

To open the bonnet:
1. Pull the bonnet release lever with
this symbol on it. It is inside the
vehicle on the lower side of the
instrument panel.
2. Go to the front of the vehicle to
find the secondary bonnet
release handle. The handle is
under the front edge of the
bonnet near the centre. Push the
handle to the right, then raise
the bonnet.
To close the bonnet:
1. Before closing the bonnet, be
sure all the filler caps are on
properly.
2. Lower the bonnet from full open
to within 15 cm (6 in) from the
closed position, pause, then push
the front centre of the bonnet
with a swift, firm motion to fully
VEHICLE CARE
close the bonnet. Check to make
sure the bonnet is closed and
repeat the process if necessary.
237

Advertisement

Table of Contents
loading

Table of Contents