Cadillac XT5 2017 Owner's Manual page 197

196 DRIVING AND OPERATING
The indicator light for both systems is
in the instrument cluster. This
light will:
Flash when TCS is limiting
wheel spin.
Flash when StabiliTrak is
activated.
Turn on and stay on when either
system is not working.
If either system fails to turn on or to
activate, a message displays in the
Driver Information Centre (DIC),
and comes on and stays on to
indicate that the system is inactive
and is not assisting the driver in
maintaining control. The vehicle is
safe to drive, but driving should be
adjusted accordingly.
If comes on and stays on:
1. Stop the vehicle.
2. Turn the engine off and wait
15 seconds.
3. Start the engine.
Drive the vehicle. If comes on and
stays on, the vehicle may need more
time to diagnose the problem. If the
condition persists, see your dealer.
Turning the Systems Off and On
Caution
Do not repeatedly brake or
accelerate heavily when TCS is off.
The vehicle driveline could be
damaged.
To turn off only TCS, press and
release . The Traction Off light
displays in the instrument cluster and
the appropriate DIC message is
displayed. See Ride Control System
Messages 0 140. To turn TCS on again,
press and release . The Traction Off
light displayed in the instrument
cluster will turn off and the
appropriate DIC message is displayed.
If TCS is limiting wheel spin when
is pressed, the system will not turn off
until the wheels stop spinning.
To turn off both TCS and StabiliTrak,
press and hold until the Traction
Off light and StabiliTrak Off
light come on and stay on in the
instrument cluster. The appropriate
DIC message is displayed. See Ride
Control System Messages 0 140. To
turn TCS and StabiliTrak on again,
press and release . The Traction Off
light and StabiliTrak Off light
the instrument cluster turn off and
the appropriate DIC message is
displayed.
in