Advertisement
Setting up a Windows printer with Wintix
Click on this button to bring
•
up the label designer.
Set the label sensor to be
•
'Label mark.'
Set the top offset to be –1.40.
This setting can be changed.
See Note.
With Datamax v 5 firmware: Top
offset 4.27; Tear offset 4.98.
NOTE: These settings are
guidelines. On Center Stage
Software's setup, we
changed Top Offset to 0.00.
Set the post print action to 'Tear'
•
and the tear offset to 0.00. This is
one place where you may want
to change things later.
Select Windows printer (standard)
•
Yes, that's right – even though you
are using a Datamax.
Advertisement
