2.1
The detachable stand of the VE278Q/VK278Q Series LED monitor is specially
designed for VESA wall mount.
To detach the arm/stand:
1.
2.
3.
2-1
Downloaded from
www.Manualslib.com
Detaching the arm/stand
(for VESA wall mount)
Disconnect power and signal cables. Carefully put the front of the monitor
face down on a clean table.
Use a screwdriver to remove the two screws that secure the stand to the
monitor.
Detach the stand from the monitor.
•
W e recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
•
H old the stand of the monitor while removing the screws.
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
•
Use only the UL Listed Wall Mount Bracket with minimum weight/load 22.8
Kg (Screw size: 4 x 12 mm).
manuals search engine
Chapter 2: Setup