OPERATING
HANDBOOK
Starting machine
•
Turn main section switch to I (ON), the indicator (1) "voltage" lights".
•
Turn the potentiometer (4) to the minimum speed.
•
Adjust thermostat (5) on required temperature. Usual ironing temperature is around
180 °C (355 °F) for cotton.
•
Press button (3) "On".
The cylinder and the guiding bands rotate.
The fan works and draws the air out of the machine to outside the building.
•
Press switch (8) "heating on", the key indicator lights. The heating indicator (6) lights.
The temperature rise is reached after approximately 12 min for a temperature of 180
°C (355 °F). The heating indicator (6) switches off as soon as the required ironing tem-
perature is reached.
•
Check that the fi nger protection is working. The fi nger protection must stop the ma-
chine when it is touched.
Press button (3) "On" to restart the machine.
•
Adjust potentiometer (4) on an average speed and start ironing.
•
Ajust the ironing speed depending on the textile processed and the moisture rate of
the linen.
•
If the pipe burner is secured, the indicator (6) switches off and the indicator (7) lights ;
(to restart the machine, press "STOP HEATING" and then "HEATING ON" (8).
3. Method of use
01103040
0409
Notice
Date
2
3
Page