Electrolux IC43316 Operating Handbook page 22

01103040 0409
Notice Date
Complementary instructions for operation
Check daily that the hand safety bar is working correctly, the machine must stop when you
press it. The screen on control panel displays "Emergency Stop/ Reset Push Button". Press
any key to resume ironing.
Ironing Temperature Display
The control enclosure includes an electronic thermostat panel which shows in real time the
temperature of the ironing cylinder.
A running temperature over the selected temperature is normal. This happening is not a
failure of measuring devices but it is due to heating inertia.
In automatic mode, temperature and speed management are handled by the machine itself.
Fire-related risks.
Should a fi re breakout inside the machine, it is recommended that you use a CO2 extin-
guisher.
Note: in the case of a machine using gas heating, it is strictly forbidden to attempt to put out
the fi re before having fi rst turned off the gas inlet valve.
The client must ensure conformity towards the Labour Code and his supplier of fi re-fi ghting
equipment who issues the Q4 certifi cate to him.
Repair and maintenance work on the machine.
All work on the machine must be carried out by qualifi ed personnel, able to carry out the work
required.
Ensure that the applicable safety conditions for the destination country are fully observed.
6
4
Page
SAFETY
Make sure that the protection casings are in position before use.
4. Safety
OPERATING
HANDBOOK