Interconnection With Vertex Vx- Series Transceiver - Vertex VXR-1000 Service Manual

Vehicular cross-band repeater
Hide thumbs Also See for VXR-1000:
Table of Contents

Advertisement

ACENT – Revenda Autorizada VERTEX | Locação | Vendas | Assistência Técnica | Acessórios ORIGINAIS. VENDAS: 0800 77-55-200
Interconnection with Vertex VX- Series Transceivers
This document outlines the interconnections and hardware settings required for interface of the Ver-
tex VXR-1000 Compact Mobile Repeater to the Vertex VX- series of mobile transceivers.
1. Interconnections to Mobile Transceivers
The chart below shows the interconnections between J1004 on the VXR-1000 and the correspond-
ing interface jacks on the compatible mobile transceivers.
VXR-1000 DSUP 9-pin Accessory Connector
Pin 1 GND
Pin 2 Mobile Transmit Audio
Pin 3 Power Supply Control
Pin 4 Mobile PTT Output
Pin 5 Vc c (13.8 V)
Pin 6 Mobile Receive Audio
Pin 7 Mobile COR Detec t (Note 1)
Pin 8 Mobile Microphone Audio
Pin 9 Mobile TX detect/Mobile Mic. PTT (Note 2)
Shield GND
Note 1: The Mobile COR Detect line may be
connected, inside the mobile trans-
ceiver, to either pointshown (e.g. for
the VX-2000, either to Pin 1 of J1003
(SQ) or to the Base of Q1008 )AF
M
). See Section 6 of this document
UTE
for information regarding the Mobile
COR Detect connection in the VX-
3000.
FTL-7011
Pin 8 of J 2006
GND
Pin 4 of J 2006
MIC IN
Pin 12 of J 2006
13.8V SWED
Pin 1 of J 2006
PTT
Pin 9 of J 2006
13.8V
Pin 3 of J 2001
DET IN
Pin 1 of J 2001
S Q SIG
(AF MUTE)
(or Base of Q2005)
No Connection
Pin 5 of J 2005
RX/TX
GND
Note 2: When the mobile transceiver is not
www.radio-vertex.com.br | acent@radio-vertex.com.br
VX- 2000
Pin 5 of J 1003
GND
Pin 5 of J 1004
Pin 3 of J 1003
MOD IN
Pin 3 of J 1004
Pin 8 of J 1003
+5V
Pin 8 of J 1004
Pin 7 of J 1003
PTT
Pin 7 of J 1004
TP1003
13.8V
Pin 2 of J 1003
DISC OUT
Pin 2 of J 1004
Pin 1 of J 1003
S Q
Pin 1 of J 1004
(AF MUTE)
(or Base of Q1008)
No Connection
No Connection
TP1013
TX 9V
No Connection
GND
used in a trunking environment, the
"Mobile TX Detect" function is not
used.
VX- 3000
GND
EXM
13 S WD
PTT
13.8 V IN
13.8V
LINE
S Q
GND
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents