Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Dolby Laboratories Conference Phone
Summary of Contents for Dolby Laboratories Conference Phone
- Page 1 Dolby Conference Phone Configuration guide for Microsoft Skype for Business Version 3.2 30 June 2017...
- Page 2 Dolby Digital Plus Advanced Audio Pro Logic ™ ™ Dolby Digital Plus Home Theater Surround EX ® Dolby Home Theater All other trademarks remain the property of their respective owners. ® Dolby Voice and the Dolby Voice logo are registered trademarks of Dolby Laboratories.
-
Page 3: Table Of Contents
3.4 Configuring the operation mode 11 3.5 Opening the phone web interface 12 3.6 Configuring NTP Registering the phone to Audiocodes SIP Phone Support Server Glossary 19 Dolby Conference Phone version 3.2 configuration guide for Microsoft Skype for Business 30 June 2017... -
Page 4: Introduction
Phone Server web administration portal and the phone web interface. 1.2 Related documentation Review all of the Dolby Conference Phone documentation to ensure that the phone is set up correctly so that you have the best conferencing experience possible. These documents are available: •... -
Page 5: Requirements And Prerequisite Information
2.2 Network firewall requirements Network Address Translation (NAT) is not supported by the Dolby Conference Phone. Therefore, the Audiocodes SIP Phone Support Server servers should be on the same side of the organization firewall as the Dolby Conference Phones. -
Page 6: Configuring A New User And The Phone
3 Configuring a new user and the phone Deploying a Dolby Conference Phone with Audiocodes SIP Phone Support Server requires adding a new user in the Audiocodes SIP Phone Server, configuring the Dolby Conference Phone by using its touch screen and web interface, and then registering the phone to Audiocodes SIP Phone Support Server with the phone web interface. - Page 7 4. In the Filter field, type the Skype for Business user name, or type * for all users, and click Find. 5. In the list of Skype for Business users, click Add next to an available user, indicated by the icon. 6. Click Submit. Dolby Conference Phone version 3.2 configuration guide for Microsoft Skype for Business 30 June 2017...
- Page 8 SIP device. The Numeric Name can be up to 16 characters long and cannot include the characters #, @, or %. After entering the Password and Numeric Name, click Submit. Dolby Conference Phone version 3.2 configuration guide for Microsoft Skype for Business 30 June 2017...
-
Page 9: Plugging In And Setting Up The Phone Automatically
This only happens if the phone's administrator completed preparations so that the phone can discover the presence of a Dolby Conferencing Console or a provisioning server by means of a Domain Name System (DNS) SRV record. Dolby Conference Phone version 3.2 configuration guide for Microsoft Skype for Business 30 June 2017... -
Page 10: Configuring 802.1X
About this task The network setup wizard detects many of the settings for you, including your virtual LAN (VLAN) and IP network settings. In this figure, the Dolby Conference Phone has detected those settings upon initial setup. If you see this screen, you can configure some 802.1X options, described in this section, directly in the wizard. -
Page 11: Updating 802.1X Authentication Credentials
3. Select Network Configuration > 802.1x. 3.4 Configuring the operation mode You can configure the Dolby Conference Phone for either Conferencing mode or Dual mode. Dolby Conference Phone version 3.2 configuration guide for Microsoft Skype for Business 30 June 2017... -
Page 12: Opening The Phone Web Interface
3. Enter this URL in the browser address bar. If a security warning displays, accept the warning and proceed. https://your phone IP address 4. Log in to the Dolby Conference Phone using the default credentials: • Username = admin Dolby Conference Phone version 3.2 configuration guide for Microsoft Skype for Business... -
Page 13: Configuring Ntp
Procedure 1. Click the + to open the network settings parameters. 2. Click the + to open the NTP section. Dolby Conference Phone version 3.2 configuration guide for Microsoft Skype for Business 30 June 2017... -
Page 14: Registering The Phone To Audiocodes Sip Phone Support Server
3. Enter the server addresses provided by your local system administrator. 3.7 Registering the phone to Audiocodes SIP Phone Support Server Use the Settings page of the Dolby Conference Phone web interface to specify the Audiocodes SIP Phone Support Server account settings and register the phone. Procedure 1. - Page 15 If you have a secondary (failover) server available, enter the details in the Secondary Call Server/Outbound Proxy field. • Set Transport Type to match your selection in the connection settings of the previous procedure. Dolby Conference Phone version 3.2 configuration guide for Microsoft Skype for Business 30 June 2017...
- Page 16 If the information is correct, the phone registers with Audiocodes SIP Phone Support Server. 5. To verify the registration with Audiocodes SIP Phone Support Server, go to Status > System > Device. Dolby Conference Phone version 3.2 configuration guide for Microsoft Skype for Business 30 June 2017...
- Page 17 Configuring a new user and the phone Dolby Conference Phone version 3.2 configuration guide for Microsoft Skype for Business 30 June 2017...
- Page 18 Configuring a new user and the phone Dolby Conference Phone version 3.2 configuration guide for Microsoft Skype for Business 30 June 2017...
-
Page 19: Glossary
UDP is a member of the IP suite. VLAN Virtual LAN. Any broadcast domain that is partitioned and isolated in a computer network at the data link layer (OSI layer 2). Dolby Conference Phone version 3.2 configuration guide for Microsoft Skype for Business 30 June 2017...
Need help?
Do you have a question about the Conference Phone and is the answer not in the manual?
Questions and answers