Managing Your Wifi Connection; Reset - Barbie Hello Dreamhouse Owner's Manual

Table of Contents

Advertisement

MANAGING YOUR WIFI CONNECTION

During Setup, you connected Hello Dreamhouse to your Wifi network. If you want to connect to a different Wifi
network or are having difficulty with your Wifi connection, follow these steps to enter Connection Mode.
1. Confirm your router or modem is powered on.
2. Note the name (SSID) and password for the new Wifi network. You will be connecting Hello Dreamhouse
to this network.
3. Launch the Hello Dreamhouse Companion App.
4. Select "Setup Wifi" and follow the in-app instructions to configure a new Wifi network.
5. Hold the Wifi indicator button for 3 seconds. The bottom dot of the Wifi indicator button will flash green
to indicate that Connection Mode is active.
To exit Connection Mode manually, hold the Wifi indicator button for 3 seconds.

RESET

If Hello Dreamhouse is not responding, press the reset switch with a paperclip to perform a soft reset.
Wifi and ToyTalk account information are not affected. Hello Dreamhouse will turn off and then back on
to indicate a successful reset.
Reset Switch
To reset Hello Dreamhouse to factory settings, press and hold the talk button and press the reset switch with
a paperclip. Continue holding the talk button until it flashes in about 3 seconds. This erases all Wifi network
and ToyTalk account information. The bottom dot of the Wifi indicator button will flash white three times to
indicate successful reset.
Please perform a factory reset before disposing of Hello Dreamhouse.
Talk Button
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents