Studio Monitor; Cueing Systems; Echo Return Systems - MCi JH-500 Series Manual

STUDIO MONITOR
SWITCHING
STUDIO MONITOR SELECTOR switches permit the monitoring of:
three 2-track tape machines, two 4-track tape machines, the 6 SEND BUSSES,
the 2 Stereo CUE SYSTEMS, and the 2-mix , 4-mi x outputs .
The STUDIO MONITOR normally monitors in STEREO, but buttons
are provided on the STUDIO MONITOR module to select either
MONO or QUAD.
A STUDIO MUTE switch is provided to insure positive monitor
kill.
The MASTER STUDIO LEVEL CONTROL is capable of adjusting the
monitor level from + 6 Db to - infinity.
CUE I NG SYSTH1S
Two STEREO CUEING SYSTEMS are provided. These systems may be
fed from any of the following sources:
The STEREO
MIX
busses,
SENDS (1-2), (3-4), (5-6), The ECHO RETURN circuits, or an external
Stereo signal through the patch panel.
ECHO RETURN SYSTEMS
Four ECHO RETURN systems are provided, each with full QUAD
PANNING. Two of these circuits are in the MASTER module and
two are in the COMMUNICATIONS module. One of the circuits in
each module can be switched into any combination of CHANNEL
BUSSES. (32
pu s h buttons a r e provid e d)
All four of the systems are
returned to the QUAD MIX BUSSES.
A PAN switch is provided for the two ECHO RETURN circuits which
have switching capability. This switch allows panning between
the ODD and the EVEN NUMBERED channels as a function of the
LEFT- RIGHT PAN pot. FRONT-BACK panning will not affect the
CHANNEL OUTPUT BUSSES.
Two switches provided for each ECHO RETURN allow connection of
that return circuit to CUE I and/or CUE 2 busses through the
LEFT-RIGHT pan pot.
All ECHO RETURN levels may be assigned to the MASTER FADER or
to a GROUP FADER through the SUB GROUP SELECTOR switches
provided.