High Pass Filter; Eq Switches - MCi JH-500 Series Manual

HIGH PASS FILTER
A HIGH PASS FILTER has been provided which is independent of the
other EQ circuits. It is tunable between 30 Hz and 300 Hz and
has a slope of 24 dB per octave. This circuit may be switched
out if desired.
EQ SWITCHING
An EQ IN/OUT switch is provided to permit bypassing all
equalization if pesired.
A movable PATCH POINT is provided to permit the compression
or limiting to be connected either before or after EQ.
An EQ MONITOR/CHANNEL switch is provided to permit the EQ to
be placed either in the MIKE circuit for equalizing the
signal to the MASTER TAPE, or in the MONITOR circuit for
equalizing the RETURN signal •
-
~ ,
........ • • •. 1 I ~ I . I •• ................
JH-500 SERIES I/O MODULE