Hisense RF20N6ASE User's Operation Manual page 6

6
Adjusting the door handle
Before you use the appliance, please check
the refrigerator handles. If the handles are
loose, please adjust them by using an Allen
wrench in the clockwise direction until
handles are securely in place. Each one of
the handles is fitted with 2 screws.
Adjusting the doors
Both left and right doors are equipped with
●
adjustable axes, which are located in the
lower hinges.
Before adjusting its doors, please ensure
●
that the refrigerator is level. Please review
t h e p r e v i o u s s e c t i o n o n " L e v e l i n g
appliance". If you find the top of the doors
are uneven, insert the Allen wrench into the
hinge axis, and turn it clockwise to rise the
door or anticlockwise to lower the door, and
insert an E Ring into the gap.
E Ring
Allen Wrench (Provided)
Adjustable part
Ventilation of appliance
In order to improve efficiency of the cooling
system and save energy, it is necessary to
maintain proper ventilation around the
appliance for heat dissipation. For this
reason, sufficient space should be provided
around the refrigerator and the area should
be clear of any obstruction that affects the
air circulation.
2"(50mm)
3"(76mm)
2"(50mm)
Suggestion: It is advisable leaving at least
3 inch(75mm) of clearance from the back of
appliance to the wall, and at least 2
inch(50mm) from top, and on both sides.
When positioned in a corner area, provide a
clear space at least 16 inch(406mm) on the
each hinge side to allow the doors to open
enough to enable the removal of drawers
and shelves. As shown in the following
diagram.
35
67
23/32"
2"(50mm)
9 0 8 mm)
"(
3/4
( 1720mm)