Related Manuals for Smart Sensor AR856
Summary of Contents for Smart Sensor AR856
- Page 1 MODEL :AR856 AIR FLOW ANEMOMETER INSTRUCTION MANUAL Wind velocity AR856 HOLD UNIT FLOW RESET LIGHT READ CLEAR START SAMPLE OPTION AREA NEXT ENTER Version SZ856-0...
- Page 2 PRECAUTION Thank you for purchasing our company Air Flow Anemometer This manual provides relative information on how to use the Air Anemometer and warning in operation Pls make some simple test measurement to ensure proper performance of the unit To Make the best use of this Anemometer ,read this Manual Throughtly before use it .Pls Keep this Manual Handy for reference -32-...
- Page 3 2. Warranty: CONTENTS About relative warranties please read provided warranty card. 1 Before Use We disclaims any liability due to: transportation damages; incorrect use or operation; manipulation, Check up alterations or repair attempts; without warranty card, Features invoice. Diagram of the unit LCD Displays Specifications 2 Operation...
- Page 4 1 Before Use Notice M a i n t e n a n c e & W a r r a n t y Check up 1). Maintenance: Carefully unpack your kit and ensure that you have the Replacing the battery and product maintenance: following Items .In case that any items is missing or if a.
-
Page 5: Other Items
You can also print measurement data and wind Features velocity / flow curve graph, and export Excel data file, for details please see Help file. Measurement of wind velocity, temperature and flow Unit conversion of wind velocity, temperature and flow 3. -
Page 6: Diagram Of The Unit
24.3 Wind velocity Import Figure 10 Button introduction: SMART SMART BUTTON Function SENSOR SENSOR AR856 Click to download data from anemometer. HOLD UNIT FLOW In download process, please don't switch over the picture in order RESET LIGHT READ CLEAR to avoid appearing over time mistake Over Time . - Page 7 1). ON/ OFF key: press once to power on, again to power off 2). USB interface: insert one end of the connecting cable to this interface, another to the available USB port of the computer. 3). LCD display :Max/Min value switch HOLD :Data holding key :Temperature unit switch...
-
Page 8: Lcd Display
4). Insert one end of the connecting cable into the USB LCD Display interface of the top anemometer host, as shown in figure 7: MIN 2/3 MAX READ HOLD REC km/h ft/min knots CFM CMM Wind flow Wind velocity Figure 7 TEMP 5). - Page 9 ft/min : Wind velocity unit (foot /minute) Order Order function Real time data measurement, the : Wind velocity unit (sea mile/hour) knots RealTi meM easure measured data will real time be : Wind velocity unit (mile/hour) shown on the computer. : Wind flow unit (cube foot/minute) Open measurement data file that Open...
-
Page 10: Specifications
SPECIFICATIONS Figure 5 Menu Wind Velocity Range Lowest Point Unit Accouracy Wind Velocity Resolution of start value Tool 3% 0.1 0.0-45.0 0.001 Ft/min 3% 20 0.0-8800 0.01/0.1/1 Knots 3% 0.2 0.0-88.0 0.01/0.01 Km/h 0.0-140.0 3% 0.4 0.001 0.0-100 0.001/0.01 3% 0.2 Wind flow range CMM 0-999900m /min CFM 0-999900 ft /min... - Page 11 Tabletop of the PC. 3.Software Introduction Double click the software quick way on the tabletop ( start by menu, the route is Start /Programme /smart sensor / Amemometer /Amenometer ) software interface showing as below as show in figure5: -23-...
-
Page 12: Operation
Operation Measurement of Wind Velocity and Temperature Recover the battery door , and install the batteries properly as shown in figure 1: Figure 3 Figure 1 Install Press The “ON/OFF” key, all the symbols will be shown on Click “INSTALL” to install the the program in your hard the screen for 1 second, then the unit goes into current wind disk ,then showing the interface as below as show in velocity and temperature measuring mode, the LCD screen... - Page 13 ) Wind direction Duct area Figure 4 AR856 Next Figure 2 Input your user name and company name ,click “NEXT” to 1 Wait for two Sec,to make the data stability enter Next step ,Installation interface as below as show...
-
Page 14: Connection With Pc
Wind /Air Temperature Measurement CONNECTION WITH PC 1 Wind temperature will test out when testing Wind 1.Requirement of computer configuration: Velocity , Small Vanes pattern will showing along with CPU : Pentium 600MHZ Or above ; the display of “TEMP “Symbol. One free available USB Connecting Interface;... - Page 15 Reading Data stored In memory Ramdomly: Measurement of Windflow On read Status ,Press the “SAMPLE” Key and enter the number of the record in questions and press “ENTER” Key Press the “VEL/FLOW” key to get into “FLOW” mode, then the desired data will be displayed Press “RESET” at this time the LCD screen as shown in figure 5: Key to exit As shown in figure17: READ...
- Page 16 Press the “REC” key to begin storing readings in every sampling rate. The “REC” icon will appear on the LCD indicated the data storage function is AR856 activated. Press again the “REC”key to finish data storage. 3.Press “REC” Key stop recording.
- Page 17 Max and min measurement Measurement of 2/3 Vmax Wind Flow In wind flow and velocity measuring process, press the Press the “VEL/FLOW” key to entre “FLOW” mode, the MAX/MIN” key to obtain the maximum and minimum LCD screen shows in figure 8: values, press again to exit.
-
Page 18: Measurement Of Average Wind Flow
Aim the vane at certain point of duct area properly, press MEASUREMENT OF AVERAGE WIND FLOW the “NEXT” key, on the right bottom of the LCD will show serial number, in the meantime you can take measurement Press the “VEL/FLOW” key to get into “FLOW” mode, the of the first group wind flow values.
Need help?
Do you have a question about the AR856 and is the answer not in the manual?
Questions and answers