Haier LE55B7500U Service Manual page 10

Items
Auto Scan
Manual Scan
Channel Edit
Note: Make sure you have connected RF signal cable before performing channel search.
Features Setup
Items Description
Access advanced settings.
Press OK key to select Ethernet, WiFi, WiFi Hotspot, Display, Apps, Language & input,
Advanced Setting
Update & reset, Date & time and About TV.
Please note that wireless Display feature works normally by the compatibility of mobile device.
To show Blue or Black screen when no signal input in non-ATV sources.
Blue Screen Select Off: Black screen display when no signal input.
Select On: Blue screen display when no signal input.
Scheduled Time Set a scheduled time to power on the TV when TV is in Standby mode.
Set a time period after which the TV will be turned off and enter standby mode.
Sleep Time
Sleep timer can be set to Off,10, 20, 30, 60, 90,120, 180 or 240 Minutes.
HDMI CEC
HDMI CEC Setting
Auto Standby
You can restore the factory default video and audio settings of your TV.
Reset Default The channel installation settings remain the same.
This TV does not support child lock function.
Description
TV automatically searches for the channel in the available frequency band and stores
sequentially.
Select TV menu.
Select Auto Scan and press OK key to tune channels automatically and store.
During auto searching Press BACK/
Scan the channels manually and store it to the desired channel number.
It can also be used for editing of channels searched by auto search if required.
Edit the selected channel, including Move, Delete, Favorite.
Set enable or disable HDMI CEC feature. Once this item disabled, all
HDMI CEC features would be disabled either.
Set enable or disable HDMI CEC Auto Stanby feature. Once this item
enabled, all connected CEC device would be enter standby after TV DC
power off.
key to stop search.
10