Characteristics - ADF Wed HD67401-E4V User Manual

Industrial Electronic Devices

CHARACTERISTICS:

The "HD67401, HD67402, HD67403,
machine that needs to isolate/ repeat a portion of CAN bus network (CAN 2.0A & 2.0B, CANopen, DeviceNet, J1939, NMEA2000, and
generic ISO11898 standard).
With his particular enclosure, equipped with four fixing lugs, makes available the mounting of the device in any plane surface (horizontal,
vertical, oblique).
It is possible to have the device varnished or totally resined and also in both cases with "Mini-Fit®" connectors or "AMP SuperSeal 1.5"
connectors. If is resined, the enclosure, like the "AMP SuperSeal 1.5" connectors, is waterproof (IP67).
The HD67401-E4V and HD67401-E7R
The HD67402-E4V and HD67402-E7R
The HD67403-E4V and HD67403-E7R
The HD67404-E4V and HD67404-E7R
All the four series have these characteristics:
Triple 4kV isolation between Power Supply / CAN0 / CAN1;
Varnished / Resined (optionally);
Wide power supply input range: 8...26V AC | 10...40V DC;
Mini-Fit® / AMP SuperSeal 1.5 connectors;
Metal enclosure with fixing lugs;
Possibility to use Metal hose clamps for fixing it without using lugs;
Microprocessor for data control;
Programmable baudrate on both CAN sides;
Wide temperature range: -40°C / 105°C (-40°F / 221°F).
Why uses the products:
Isolate of a portion of CAN bus network;
Connect devices with different baudrates in the same network;
Extend a line segment without lowering the baudrate;
ADFweb.com Srl – IT31010 – Mareno – Treviso
HD67404" series are rugged devices that can be located on cars, trucks, trains, boats and any other
for generic CAN 2.0A & 2.0B network.
are specific for CANopen network.
are specific for DeviceNet network.
are specific for J1939/NMEA2000 network.
User Manual CAN Repeater
Document code: MN67401_ENG Revision 1.002
INFO: www.adfweb.com Phone +39.0438.30.91.31
Page 3 of 16