Table of Contents
Advertisement
QQ
3 7 63 1515 0
[Aging Mode]
•
This mode can be used for operation check of CD section and
•
If an error occurred:
The aging operation stops.
•
If no error occurs:
The aging operation continues repeatedly.
1.
Aging Mode in CD Section
•
Operating jig (HCD-F50 only)
Remote Commander (for aging mode): J-2501-123-A
1-1. Operating Method of Aging Mode
1. Turn ON the power of the unit. Open the front cover.
2. Press three buttons
ENTER ,
MEMO INPUT simultaneously .
3. When the disc set mode is set, the ( and P LEDs blink.
4. Rotate the JOG dial. The slits (No. 10, 20, 30, 40, 51) for set-
ting the discs will come forward. Insert the discs into these
slits. Do not set the discs in other slits.
5. Set the use/disuse of the self protection function in errors. Press
the REPEAT button. When REPEAT is displayed on the fluo-
rescent indicator tube, the self protection function during the
error will become "Use".
If the REPEAT display is OFF, it means that the function is
not used. (Normally set to "Use" when performing aging.)
7. Cloase the front cover and press the ^ button.
8. The ( LED will light up, the aging mode is set, and aging
is started.
9. The aging cycle lasts 3 minutes. When problems occur during
aging, the error number will be displayed on the fluorescent
indicator tube, ( LED blinks, and the P LED will
TE
L 13942296513
light up.
(Refer to the following table for the details of the errors.)
10. Aging will be repeated as long as no errors occur.
11. After each aging cycle, the number displayed on the Fluores-
cent indicator tube will increase.
12. To end aging, press the POWER button
Error Display
DISC
Err
0C
51
Disc number
number of agings
Error code
Code number
Err 01
DISC sensor check 1
Err 02
DISC sensor check 2
Err 03
Err 04
Table operation check 2
Err 05
Loading operation check 1
Err 06
Loading operation check 2
Err *1
BU related check 1
Err *2
BU related check 2
www
Err *3
BU related check 3
Err *4
BU related check 4
Err *5
BU related check 5
.
Err *6
BU related check 6
The * numbers mean the following according to the state of the unit during aging
2 : From chucking to end of TOC read
3 : From end of TOC read to end of last track playback
4 : From end of last track playback to end of first track playback
FUNCTION
and
26
Error code
Name
No disc in the specified slit
Disc in other slits
No function
No table sensor input
Load in timeover
Load out timeover
Access timeover
High speed search NG
Q data read error
BU operation (From focus search to until signal can be read) timeover
x
ao
u163
y
GFS monitor error
i
Focus cannot be imposed by focus search
- 34 -
2 9
8
1-2. CD Section Sequence
•
During the aging mode, compact disces are seleted in the fol-
lowing sequence:
Sequence of Aging Mode
Disc change
Load in
TOC read
Access of last track
3 second playback
Access of first track
3 second playback
Load out
Q Q
3
6 7
1 3
1 5
*
DISC No.40 chucks twice during one cycle.
To differentiate, the "PROGRAM" indicator of the fluores-
cent indicator tube will light up during the second chucking.
Contents
co
.
9 4
2 8
Order of Disc Chenge
(1 sycle takes 3 minutes)
No.51
No.20
No.40
No.30
No.10
No.40*
0 5
8
2 9
9 4
2 8
m
9 9
9 9
Hide quick links:
Advertisement
Table of Contents
