Kongsberg OE14-122 User Manual page 10

OE14-122/23
JBA Explorer.lnk
Underwater Colour Pan, Tilt and Zoom Camera
Bi-Polar
Bi-Polar control is allocated two wires. The circuit is isolated and does not require any ground
reference.
Zoom
If the Bi-Polar Zoom (Tele) line is positive by 6-12V with respect to the Bi-Polar Zoom (Wide) then
the camera will zoom telescopic. If the Bi-Polar Zoom (Wide) line is positive by 6-12V with respect
to the Bi-Polar Zoom (Tele) then the camera will zoom wide.
Focus
The focus function is only available when the camera is in manual focus mode.
(Far) line is positive by 6-12V with respect to the Bi-Polar Focus (Near) then the camera will focus
far. If the Bi-Polar Focus (Near) line is positive by 6-12V with respect to the Bi-Polar Focus (Far)
then the camera will focus near.
Auto-focus
Applying a voltage of between -24V and +4V to the auto focus pin will cause the camera to go into
auto-focus mode. This is the normal auto-focus mode and does not use macro mode. An open circuit
condition (>100KΩ) will put the camera in manual focus mode. This allows the focus position to be
adjusted manually.
Pan
If the Bi-Polar Pan Left Line is positive by 6-12V with respect to the Bi-Polar Pan Right Line the camera
will Pan Left. If the Bi-Polar Pan Right Line is positive by 6-12V with respect to the Bi-Polar Pan Left Line
the camera will Pan Right.
Tilt
If the Bi-Polar Tilt Up Line is positive by 6-12V with respect to the Bi-Polar Tilt Down Line the camera will
Tilt Up. If the Bi-Polar Tilt Down Line is positive by 6-12V with respect to the Bi-Polar Tilt Up Line the
camera will Tilt Down.
Kongsberg Maritime Ltd
User Manual: OE14-122 Colour Pan, Tilt and Zoom Camera - 5023 –5
Sales and Service: Campus 1, Science and Technology Park, Aberdeen, Scotland
tel: +44 (0)1224 226500 (24 hrs) fax: +44 (0)1224 226501
colour
If the Bi-Polar Focus
Manufacturing: Airport Industrial Estate, Wick, Caithness, Scotland
tel: +44 (0)1955 603606 fax: +44 (0)1955 607520
Page 10 of 14