Advertisement
user manual
OE14-122/23
Underwater Colour Pan, Tilt and Zoom Camera
User Manual Contents
2
Standard Conditions of Warranty
3
General Information
4
Introduction
5
Quick Start
6
Remote Control
7
Supplied Software
8
RS232/RS485 Control
9
Hardwire Control
11 Network Control
12 Circuit Descriptions
13 Protection Circuitry Parts List
14 Fault Finding
OE14-122/23
Sales and Service:
Campus 1
Science and Technology Park
Aberdeen
Scotland
tel: +44 (0)1224 226500 (24 hrs)
fax: +44 (0)1224 226501
Manufacturing:
Airport Industrial Estate
Wick
Caithness
Scotland
tel: +44 (0)1955 603606
fax: +44 (0)1955 607520
Advertisement
Table of Contents
Summary of Contents for Kongsberg OE14-122
- Page 1 OE14-122/23 OE14-122/23 Sales and Service: Campus 1 Science and Technology Park Aberdeen Underwater Colour Pan, Tilt and Zoom Camera Scotland tel: +44 (0)1224 226500 (24 hrs) fax: +44 (0)1224 226501 User Manual Contents Standard Conditions of Warranty General Information...
-
Page 2: Standard Conditions Of Warranty
(The Conditions and Information form part of the Company’s conditions of trading) STANDARD CONDITIONS OF WARRANTY Instruments sold by Kongsberg Maritime Limited (hereinafter called the ‘Company’) are warranted only as stated below: Subject to the exceptions and upon the conditions specified below, the Company agrees to correct, either by... -
Page 3: General Information
Kongsberg Maritime Ltd Page 3 of 14 User Manual: OE14-122 Colour Pan, Tilt and Zoom Camera - 5023 –5 Sales and Service: Campus 1, Science and Technology Park, Aberdeen, Scotland Manufacturing: Airport Industrial Estate, Wick, Caithness, Scotland... -
Page 4: User Manual
The items listed on the encapsulation card are classified by Kongsberg Maritime as “first level maintenance items” and as such can be maintained by the operator. Care must be taken, however to ensure that the “O” Rings are lubricated with silicon grease and that no solvents (Alcohol etc) are used to clean the Correction Lens. -
Page 5: Quick Start
Then you are all ready to use the camera. Turn the power on and then press the RS485 button on the remote control. On the controlling PC go into the start menu and select Programs-> Kongsberg Software -> 14-122 GUI. This starts the GUI. -
Page 6: Remote Control
Kongsberg Maritime Ltd Page 6 of 14 User Manual: OE14-122 Colour Pan, Tilt and Zoom Camera - 5023 –5 Sales and Service: Campus 1, Science and Technology Park, Aberdeen, Scotland Manufacturing: Airport Industrial Estate, Wick, Caithness, Scotland tel: +44 (0)1224 226500 (24 hrs) -
Page 7: Supplied Software
Please read the GUI Manual for further information Kongsberg Maritime Ltd Page 7 of 14 User Manual: OE14-122 Colour Pan, Tilt and Zoom Camera - 5023 –5 Sales and Service: Campus 1, Science and Technology Park, Aberdeen, Scotland Manufacturing: Airport Industrial Estate, Wick, Caithness, Scotland... - Page 8 GUI. When finished using the camera exit the GUI and power down the camera. It is recommended that the camera is returned to Kongsberg Maritime for changing from RS232 <> RS485 control. If a qualified person is available to change the settings then the following switch settings should be used.
-
Page 9: Hardwire Control
Tilt up. Removal of these voltages will cause the camera to remain in it’s present Tilt position. Kongsberg Maritime Ltd Page 9 of 14 User Manual: OE14-122 Colour Pan, Tilt and Zoom Camera - 5023 –5 Sales and Service: Campus 1, Science and Technology Park, Aberdeen, Scotland Manufacturing: Airport Industrial Estate, Wick, Caithness, Scotland... - Page 10 Tilt Down. Kongsberg Maritime Ltd Page 10 of 14 User Manual: OE14-122 Colour Pan, Tilt and Zoom Camera - 5023 –5 Sales and Service: Campus 1, Science and Technology Park, Aberdeen, Scotland Manufacturing: Airport Industrial Estate, Wick, Caithness, Scotland...
-
Page 11: Network Control
GUI. When finished using the camera exit the GUI and power down the cameras. Important Information Note: For users of multiple OE14-122 / OE14-123 Pan & Tilt Zoom (PATZ) cameras on a single RS-485 Multi-drop network control configuration. -
Page 12: Circuit Descriptions
The 14-122-6013 Connection Board is just used to link the camera module to the rest of the camera. Kongsberg Maritime Ltd Page 12 of 14 User Manual: OE14-122 Colour Pan, Tilt and Zoom Camera - 5023 –5 Sales and Service: Campus 1, Science and Technology Park, Aberdeen, Scotland Manufacturing: Airport Industrial Estate, Wick, Caithness, Scotland... - Page 13 Figure 1.2 Kongsberg Maritime Ltd Page 13 of 14 User Manual: OE14-122 Colour Pan, Tilt and Zoom Camera - 5023 –5 Sales and Service: Campus 1, Science and Technology Park, Aberdeen, Scotland Manufacturing: Airport Industrial Estate, Wick, Caithness, Scotland tel: +44 (0)1224 226500 (24 hrs)
-
Page 14: Fault Finding
The printed circuit boards in the camera contain surface mount and other components, which are not user serviceable. It is therefore strongly recommended that the camera be returned to Kongsberg Maritime for service or repair. The camera contains 3 PCB’s, 14-122-6011, 14-122-6012 and 14-122-6013.
Need help?
Do you have a question about the OE14-122 and is the answer not in the manual?
Questions and answers